7313: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(New page: The Tektronix 7313 is a 65MHz storage oscilloscope mainframe that takes two 7000-series vertical plug-ins and one 7000-series horizontal plug-in. The direct view bistable storage CRT is ...)
 
m (Correct bandwidth)
Line 1: Line 1:
The Tektronix 7313 is a 65MHz storage oscilloscope mainframe that takes two 7000-series vertical plug-ins and one  
The Tektronix 7313 is a 25MHz<nowiki>*</nowiki> storage oscilloscope mainframe that takes two 7000-series vertical plug-ins and one  
7000-series horizontal plug-in.  The direct view bistable storage CRT is 8cm tall and 10cm wide.  The upper half
7000-series horizontal plug-in.  The direct view bistable storage CRT is 8cm tall and 10cm wide.  The upper half
and lower half are independently controllable with regard to storage settings.   
and lower half are independently controllable with regard to storage settings.   
<nowiki>* The Tektronix website mistakenly identifies it as 65MHz.</nowiki>


The low voltage power supply is linear.  It produces +50V, -50V, +15V, -15V, +5V, and +130V.
The low voltage power supply is linear.  It produces +50V, -50V, +15V, -15V, +5V, and +130V.

Revision as of 20:37, 22 December 2012

The Tektronix 7313 is a 25MHz* storage oscilloscope mainframe that takes two 7000-series vertical plug-ins and one 7000-series horizontal plug-in. The direct view bistable storage CRT is 8cm tall and 10cm wide. The upper half and lower half are independently controllable with regard to storage settings.

* The Tektronix website mistakenly identifies it as 65MHz.

The low voltage power supply is linear. It produces +50V, -50V, +15V, -15V, +5V, and +130V.

The vertical amplifier is fully discrete.

There is also a rack-mount version, the R7313.