Difference between revisions of "7403N"

From TekWiki
Jump to: navigation, search
 
Line 57: Line 57:
 
[[Category:Specifications needed]]
 
[[Category:Specifications needed]]
 
[[Category:7000 series non-storage mainframes]]
 
[[Category:7000 series non-storage mainframes]]
 +
[[Category:7000 series mainframes with linear power supplies]]

Latest revision as of 08:08, 27 July 2020

Tektronix 7403N
65 MHz non-storage mainframe
Tektronix 7403, front view

Produced from 1970 to 1975

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix 7403N is a 65 MHz oscilloscope mainframe that takes two 7000-series vertical plug-ins and one 7000-series horizontal plug-in. It has a large CRT (8 × 10 divisions @ 1.22 cm each, 154-0640-xx or 154-0672-xx tubes). There is no readout system.

There are two versions, the benchtop 7403N with the CRT above the plug-ins, and a rackmount version, the R7403N, with the CRT to the left of the plug-ins.

The 7403 was designed from the ground up. Phil Crosby led the design. The design team decided to use a discrete transistor vertical output amplifier rather than a hybrid on beryllium oxide. The output stage approximated a 3 pole MFED response with an additional real pole closer to the origin. Since the DC requirement was 3 screen diameters, the gain at the -3db point could be substantially less, meaning that the load resistor (and output stage dissipation) could be reduced, allowing the design to meet scan bandwidth and corner shift criteria with substantially reduced power dissipation.

The 7403N was discontinued around 1975, having been superseded largely by the popular 7603 introduced in 1973. In 1974, the 7403N had a list price (without plug-ins) of $950. In the same year, the 7603 was $1600.

Specifications

please add

The 7403N consumes a maximum of 130 watts and uses convection cooling, no fan. It weighs 30 pounds.

Internals

The power supply is a linear design, similar to that of the 7313. The vertical and horizontal amplifiers are made of discrete bipolar transistors. The only integrated circuit in the vertical signal path is U214, the vertical channel switch, a 155-0022-00.

The 7403N uses a CRT anode voltage of 12 kV, produced by a solid state voltage multiplier.

Pictures