7A24: Difference between revisions
Jump to navigation
Jump to search
(template change) |
(link , specs) |
||
| Line 17: | Line 17: | ||
The recommended probes were the [[P6056]] and [[P6057]]. | The recommended probes were the [[P6056]] and [[P6057]]. | ||
{{BeginSpecs}} | |||
{{Spec | Bandwidth | 400 MHz (71xx) / 350 MHz (79xx) / 300 MHz (78xx) }} | |||
{{Spec | Deflection | 5 mV/Div to 1 V/Div (1–2–5) }} | |||
{{Spec | Input impedance | 50 Ω }} | |||
{{Spec | Maximum input | 5 V (0.5 W) - no damage below 10 V (2 W) }} | |||
{{Spec | Timing | Delay difference between channels < 200 ps }} | |||
{{EndSpecs}} | |||
==Links== | ==Links== | ||
* http://www.barrytech.com/tektronix/tek7000/tek7a24.html | * [http://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_7000_series_amplifier/amplifier_7A24.htm Tek 7A24 page @ amplifier.cd] | ||
* [http://www.barrytech.com/tektronix/tek7000/tek7a24.html Tek 7A24 page @ barrytech.com] | |||
==Pictures== | ==Pictures== | ||
<gallery> | <gallery> | ||
File:Tek 7a24 1.jpg | |||
File:Tek 7a24 2.jpg | |||
File:Tek 7a24 3.jpg | |||
File:7a24 front.jpg|Front | File:7a24 front.jpg|Front | ||
File:7a24 frontend.jpg|Attenuator switches | File:7a24 frontend.jpg|Attenuator switches | ||
Revision as of 02:29, 24 January 2015
The Tektronix 7A24 is a 400 MHz dual-channel vertical plug-in for 7000-series scopes with (fused) 50 Ω BNC inputs.
The 7A24 would typically have been used in 7834, 7844 or 7854 mainframes. The recommended probes were the P6056 and P6057.
Key Specifications
| Bandwidth | 400 MHz (71xx) / 350 MHz (79xx) / 300 MHz (78xx) |
|---|---|
| Deflection | 5 mV/Div to 1 V/Div (1–2–5) |
| Input impedance | 50 Ω |
| Maximum input | 5 V (0.5 W) - no damage below 10 V (2 W) |
| Timing | Delay difference between channels < 200 ps |
Links
Pictures
-
-
-
-
Front
-
Attenuator switches
-
Amplifier board
-
Right front
-
Right rear
