If you get the "Sorry, the file cannot be displayed. There seems to be a technical issue ..." error when trying to view an image, a workaround is to click on the cog icon in the upper right side of the media viewer, and then select "Disable Media Viewer". We are aware of the problem and are looking for a solution.

Difference between revisions of "A"

From TekWiki
Jump to: navigation, search
 
(3 intermediate revisions by 2 users not shown)
Line 9: Line 9:
 
manuals=
 
manuals=
 
* [http://bama.edebris.com/manuals/tek/a/ Tektronix Type A Manual (PDF)]
 
* [http://bama.edebris.com/manuals/tek/a/ Tektronix Type A Manual (PDF)]
* [http://w140.com/tek_fcp/tek_type_a_factory_cal_proc.pdf Tektronix Type A Factory Calibration Procedure (PDF)]
+
<!-- * [http://w140.com/tek_fcp/tek_type_a_factory_cal_proc.pdf Tektronix Type A Factory Calibration Procedure (PDF)] -->
 +
* [[Media:tek_manuals_type_a.pdf|Tektronix Type A Manual (PDF, OCR, bad-OCR)]]
 +
* [[Media:tek_type_a_fcp.pdf|Tektronix Type A Factory Calibration Procedure (PDF, OCR)]]
 
}}
 
}}
 
The '''Tektronix Type A''' is a single-channel preamp [[introduced in 1959]] for [[500-series scopes]].
 
The '''Tektronix Type A''' is a single-channel preamp [[introduced in 1959]] for [[500-series scopes]].

Latest revision as of 17:13, 14 October 2018

Tektronix Type A
20 MHz amplifier plug-in
Tektronix Type 53A

Compatible with 500-series scopes

Produced from 1954 to 1962

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix Type A is a single-channel preamp introduced in 1959 for 500-series scopes. It provides two inputs and has a switch to select between them. A 545 with a Type A has a system risetime of 18 nanoseconds and a bandwidth of 20 MHz.

The plug-in uses a 12AU6 in the front end as a cathode follower. This input stage drives the second stage, a differential amplifier made of two more 12AU6 tubes. The second stage drives the output stage, a pair of cathode followers made of both halves of a 12AT7 tube. The plate of each output tube is connected to the cathode of the other output tube by a 5 nF capacitor. This "cross-coupling" extends the high-frequency response.

Although 1959 was the first year one could find a "Type A" in the catalog, the same instrument with earlier "Type 53/54A" nomenclature was in the August 1956 Short Form catalog, and its slower Type 53A ancestor was in the August 1954 catalog which introduced the first 500-series scopes, the 531 and the 535. Type 53A has only three tubes, and a bandwidth of 10 MHz in the 530 mainframes. Tek never documented its performance in the 540 mainframes.

Type A was the first letter-series plug-in to be discontinued, in 1962. Customers were told to get Type B instead, although it cost more.

Specifications

Please add

Pictures