AWG2005: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
The '''Tektronix AWG2005''' is an arbitrary waveform generator.
The '''Tektronix AWG2005''' is an arbitrary waveform generator.


{{MissingSpecs}}
Specifications:
 
Range: .01Hz to 20MHz 4 Digit resolution (Std.) Waveform generator editing Clock (Option 05)
 
Memory: 64K x 12 bits Waveform can position 256 data point boundary in the waveform memory, 256 Waveform maximum.
 
Catalog Memory 4 Mb
 
DA Converter Resolution: 12 bits
 
Internal Storage: NVRAM 512K
 
Internal Disc Drive:3.5 Inch Floppy Drive
 
Internal Diagnostics and Calibration
 
Optional FPP (Option 09)
 
Sweep Types: Linear, Log, Arbitrary
 
Sweep Modes: Continuous, Triggered, Gated
 
Output Range: 0.05 to 10V pp
 
Offset Range: -5.0 to 5.0V
 
Current Source: -200mA to 200mA
 
Output rated into 50Ohm Load
 
Output Impedance: 50 Ohm
 
Transfer over GPIB or RS-232 Interfaces
 
Direct Transfers Available from TDS Series, 2200 Series,
2400 Series, 11000 Series, AFG 2020 or any AWG20XX Series Instrument
2 Channel (Std) (4 Channels - Option 02)
 
Std: Weight: 10.7 kg (23.5 Lbs.)
 
Height: 160mm (6.4 in)
 
Width: 360mm (14.3 in) Includes Handle
 
Length A: 490 mm (19.25 in) With Front Cover
 
Length B: 560 mm (22.2 in) Handle Extended
 
CRT: Monochrome 132mm (5.2 in) horizontally by 99mm (3.9 in) vertically
 
CRT Resolution:640H x 480V (Pixels)
 
Backup Battery Type: Li 3 V, 650mAH Soldered to the Back plane connector board.  Holds data in the NVRAM when AC power is off.
 
Rated Voltage 100VAC to 240VAC Continuous Range CAT II
 
Range (Low): 90 - 127 VAC 48Hz to 440Hz
 
Range (High):      90 - 250 VAC 48Hz to 63 Hz
 
Power Consumption (MAX): 300W
 
Current (MAX): 4A
 
Operating Temp +10C to +40C
 
Non- Operating: -20C to +60C
 
Max Operating Altitude 4.5km (15000 feet)
 
Cooling: Forced Air 12V Fan
 
Clearance A:  76mm (3 Inches) Top
 
Clearance B:  150mm (6 Inches) Sides
 
Clearance C:  76mm (3 Inches) Rear
 
Reference Oscillator: 12.6 MHz
 
Function Generator: SINE/TRIANGLE/SQUARE/RAMP and PULSE
 
Range: 1Hz to 200kHz
 
Amplitude: Variable from 50mV to 10V in 1mV increments
 
Offset: Variable +/-5V in 5mV increments
 
Polarity: Normal/Inverted
 
Duty (Pulse Only): 0% to 100% in 1% Increments
 
Operating Mode: Continuous Mode
 
Auxiliary Output Marker:  2V into 50Ohm Square Pulse
 


==Manuals==
==Manuals==

Revision as of 00:28, 30 January 2020

The Tektronix AWG2005 is an arbitrary waveform generator.

Specifications:

Range: .01Hz to 20MHz 4 Digit resolution (Std.) Waveform generator editing Clock (Option 05)

Memory: 64K x 12 bits Waveform can position 256 data point boundary in the waveform memory, 256 Waveform maximum.

Catalog Memory 4 Mb

DA Converter Resolution: 12 bits

Internal Storage: NVRAM 512K

Internal Disc Drive:3.5 Inch Floppy Drive

Internal Diagnostics and Calibration

Optional FPP (Option 09)

Sweep Types: Linear, Log, Arbitrary

Sweep Modes: Continuous, Triggered, Gated

Output Range: 0.05 to 10V pp

Offset Range: -5.0 to 5.0V

Current Source: -200mA to 200mA

Output rated into 50Ohm Load

Output Impedance: 50 Ohm

Transfer over GPIB or RS-232 Interfaces

Direct Transfers Available from TDS Series, 2200 Series, 2400 Series, 11000 Series, AFG 2020 or any AWG20XX Series Instrument 2 Channel (Std) (4 Channels - Option 02)

Std: Weight: 10.7 kg (23.5 Lbs.)

Height: 160mm (6.4 in)

Width: 360mm (14.3 in) Includes Handle

Length A: 490 mm (19.25 in) With Front Cover

Length B: 560 mm (22.2 in) Handle Extended

CRT: Monochrome 132mm (5.2 in) horizontally by 99mm (3.9 in) vertically

CRT Resolution:640H x 480V (Pixels)

Backup Battery Type: Li 3 V, 650mAH Soldered to the Back plane connector board. Holds data in the NVRAM when AC power is off.

Rated Voltage 100VAC to 240VAC Continuous Range CAT II

Range (Low): 90 - 127 VAC 48Hz to 440Hz

Range (High): 90 - 250 VAC 48Hz to 63 Hz

Power Consumption (MAX): 300W

Current (MAX): 4A

Operating Temp +10C to +40C

Non- Operating: -20C to +60C

Max Operating Altitude 4.5km (15000 feet)

Cooling: Forced Air 12V Fan

Clearance A: 76mm (3 Inches) Top

Clearance B: 150mm (6 Inches) Sides

Clearance C: 76mm (3 Inches) Rear

Reference Oscillator: 12.6 MHz

Function Generator: SINE/TRIANGLE/SQUARE/RAMP and PULSE

Range: 1Hz to 200kHz

Amplitude: Variable from 50mV to 10V in 1mV increments

Offset: Variable +/-5V in 5mV increments

Polarity: Normal/Inverted

Duty (Pulse Only): 0% to 100% in 1% Increments

Operating Mode: Continuous Mode

Auxiliary Output Marker: 2V into 50Ohm Square Pulse


Manuals

Pictures