AWG420
Jump to navigation
Jump to search
The Tektronix AWG420 is a dual channel arbitrary waveform generator.
Key Specifications
| Sampling Frequency | 10 kHz to 200 MHz, 7 digits resolution |
|---|---|
| Waveform memory | 64 – 4,050,000 points (64 - 16,200,000 - Opt.01 16 M memory) |
| Sequence memory | Maximum 8000 steps |
| Sequence counter | 1 to 65536, or infinite |
| D/A resolution | 16 bits |
| Noise, typical | –140 dBc/Hz to -95 dBc/Hz |
| Output Impedance | 50 Ω |
| Output voltage | -2.0 V to +2.0 V, into a 50 Ω load |
| Amplitude range | 20 mVp-p to 2 Vp-p, 1 mV resolution, Offset –1 V to +1 V, into a 50 Ω load |
| Rise/fall time | ≤ 4 ns (at 10% to 90% or amplitude) |
| Power | 90–250 VAC, 48–63 Hz, 400 W (standard) |
| Dimensions | 193 mm (7.6") x 433 mm (16.69") x 508 mm (20"), H×W×L |
| Net Weight | 14.1 kg (31.1 lb) |
Software
- AWG400/500/600/700 Conversion Utility - Converts ASCII and AWG2000 Series file formats. 066-0089-00 (ZIP)
- ARB-Link Waveform Creation Utility 062-A270-50 (ZIP)
- Multi-Carrier IQ Generator - MCIQ. Create digitally modulated signals and waveforms 066-0405-00 (ZIP)
- Wavewriter software Win3.1, 95, 98, NT4 100-0000-064 (ZIP)
- Labview Examples 066-TSC1-01 (ZIP)
Standard Accessory Floppy Disks
- AWG500 Series Sample Waveforms Disk 066-0071-00 (ZIP)
- AWG500 Series GPIB Sample Program Disk 066-0073-00 (ZIP)
- AWG500 Performance Verification Disk 062-A259-50 (ZIP)
Firmware
- AWG400 Series Program Upgrade v1.3 066-0072-00 (ZIP)
- AWG400 Series Program Upgrade v3.0 066-A001-50 (ZIP)
Options
- Standard - US power cord
- A1 - Europe power cord
- A2 - UK power cord
- A3 - Australian power cord
- A5 - Switzerland power cord
- AC - China power cord
- A99 - No power cord
- 01 - 16MB memory upgrade
- 03 - P4116 digital data output pod
- 1R - Rackmount
- 1S - WaveWriter S3FTx00 Software
- 10 - 128 MByte Flash Disk (replaces Hard disk)
- D1 - Certificate with Calibration Data
Optional Accessories
- 070-A811-51 - Service Manual
- 200-3696-01 - Front Cover
- 012-A217-00 - SMB - pin header cable set (17x 012-1503-00 and a housing shell)
- 012-A218-00 - Pin header - pin header cable set (17x 012-1505-00 and two housing shells)
- 012-1503-00 - SMB - pin header cable (20 in)
- 012-1505-00 - Pin header - pin header cable
- 015-0671-00 - SMB to BNC adapter
- 012-0991-00 - GPIB cable
- 012-1342-00 - BNC cable, 50 Ω, 0.61 m (24 in)
- 012-0057-01 - BNC cable, 50 Ω, 1.07 m (42 in)
- 012-1256-00 - BNC cable, 50 Ω, 0.98 m (38.6 in) double-shield
- 012-1458-00 - SMB-SMB cable, 50 Ω, 1 m (3.3 ft) double-shield
- 012-1459-00 - SMB-BNC cable, 50 Ω, 1 m (3.3 ft) double-shield
- 011-0049-02 = BNC terminator, 50 Ω
- 015-0660-00 - BNC power divider, 50 Ω, DC to 300 MHz, VSWR: 1.2 max.
- 015-0657-00 - BNC low pass filter, 100 MHz
- K745 - Cart
- 016-1675-XX - Rack Mount Kit (for field conversion)
- 116-A015-00 - P4116 digital data output pod
- 020-A046-00 - 16MB memory upgrade kit
Standard Accessories
- 071-A809-52 - User Manual
- 070-A810-50 - Programmer Manual
- 062-A257-XX - Sample waveform floppy disk, 3.5 inch
- 062-A258-XX - GPIB sample program floppy disk, 3.5 inch
- 062-A259-XX - Performance check/adjustment floppy disk 3.5 inch
- 063-3763-XX - Arb-Express Software Package
- 061-4288-XX - Arb-Express Software Package, Instructions
- 161-0232-01 - U.S. Power Cord
- Certificate of Traceable Calibration - Not Orderable
Links
- EEVBlog Forum Threads:
Pictures
-
AWG420 Front
-
AWG420 3/4 view
-
AWG Rear Panel
-
AWG420
-
AWG420
-
AWG420
-
AWG420
-
AWG420
-
AWG420
