CG5011

From TekWiki
Jump to navigation Jump to search
Tektronix CG5011
programmable calibration generator
Tektronix CG5011

Produced from 1990 to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix CG5011 is a programmable calibration generator plug-in for the TM5000 system.

It is a source of calibrated timing signals, calibrated amplitude voltage and current waveforms, and pulses with low distortion edges, used to calibrate a wide range of oscilloscope parameters, either manually or as part of a GPIB controlled system.

The CG5011 occupies three slots in a TM5006 mainframe. It comes with a 015-0611-00 Programmable Pulse Head (required for operation) and a 015-0310-01 Comparator Head. The cable set p/n is 012-0884-00.

An optional 015-0309-01 variable remote control attaches through a LEMO S-series connector.

Key Specifications

  • please add

Test modes:

  • Vertical Gain
  • Horizontal Timing and Gain
  • Vertical Bandwidth/Pulse Response Characteristics
  • Probe Accuracy and Compensation
  • Current-Probe Accuracy
  • Calibrator-Output Accuracy

Option 01 adds a temperature compensated, 5 MHz crystal oscillator for a high accuracy time base.

Links

Pictures

Components

Some Parts Used in the CG5011

Part Part Number(s) Class Description Used in
Motorola 6800 156-0426-00 Monolithic integrated circuit 8-bit microprocessor 021-0206-00 021-0374-00 067-0902-00 067-1137-99 222 222A 222PS 2424L 2445 2465 4051 7912 7912AD 7A16P 7A29P 7B81P 7B90P 833 834 CG5001 CG551AP CG5010 CG5011 DF1 DF2 DM5010 MI5010 SI5010 PS5004 PS5010 SG5010