CG5011: Difference between revisions
Jump to navigation
Jump to search
(Created page with "{{TM5000 | mfg=Tektronix | type=CG5011 | function=programmable calibration generator | class=signal generator | image=cg5011.jpg | introduced=(?) | discontinued=(?) | manuals...") |
No edit summary |
||
| Line 5: | Line 5: | ||
}} | }} | ||
It is used | It is a source of calibrated timing signals, calibrated amplitude voltage and current waveforms, and pulses with low distortion edges, | ||
used to calibrate a wide range of oscilloscope parameters, either manually or as part of a GPIB controlled system. | |||
The CG5011 | The CG5011 occupies three slots in a TM5006 mainframe. | ||
It comes with a [[015-0611-00]] Programmable Pulse Head (required for operation) and a [[015-0310-01]] Comparator Head. | |||
The cable set p/n is [[012-0884-00]]. | |||
Test modes: | Test modes: | ||
Revision as of 03:21, 27 September 2015
The Tektronix CG5011 is a programmable calibration generator plug-in for the TM5000 system.
It is a source of calibrated timing signals, calibrated amplitude voltage and current waveforms, and pulses with low distortion edges, used to calibrate a wide range of oscilloscope parameters, either manually or as part of a GPIB controlled system.
The CG5011 occupies three slots in a TM5006 mainframe. It comes with a 015-0611-00 Programmable Pulse Head (required for operation) and a 015-0310-01 Comparator Head. The cable set p/n is 012-0884-00.
Test modes:
- Vertical Gain
- Horizontal Timing and Gain
- Vertical Bandwidth/Pulse Response Characteristics
- Probe Accuracy and Compensation
- Current-Probe Accuracy
- Calibrator-Output Accuracy
Option 01 adds a temperature compensated, 5 MHz crystal oscillator for a high accuracy time base.