Difference between revisions of "D"

From TekWiki
Jump to: navigation, search
m (next longest life)
Line 24: Line 24:
 
then shortened to Type D in 1959 with the introduction of the 5xxA scopes.  Its last year was 1968, having been superseded  
 
then shortened to Type D in 1959 with the introduction of the 5xxA scopes.  Its last year was 1968, having been superseded  
 
by the constant-bandwidth model [[1A6]].
 
by the constant-bandwidth model [[1A6]].
 +
 +
[[K]], [[L]], and [[T]] are tied for longest production life, at 16 years.
 +
[[B]], [[D]], and [[G]] are next at 15 years.
  
 
[[Lavoie Laboratories]] produced an unauthorized clone, the [[Lavoie LA-265-D]].
 
[[Lavoie Laboratories]] produced an unauthorized clone, the [[Lavoie LA-265-D]].

Revision as of 16:16, 7 August 2017

Tektronix D
Differential amplifier
D front view

Compatible with 500-series scopes

Produced from 1954 to 1969

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix Type D is a differential amplifier plug-in for 500-series scopes.

It has high gain, and the bandwidth depends on the gain, ranging from 2 MHz at 50 mV/div and up, to 300 kHz at 1 mV/div.

It displays the difference between two input signals, with a common-mode rejection ratio of 10,000. It has six tubes, on a shock-mounted subchassis to avoid microphonics.

Type D was introduced with the 531 and 535 in 1954 as Type 53D, was briefly renamed Type 53D/54D in 1955 with the introduction of the 541 and 545, then quickly renamed Type 53/54D, then shortened to Type D in 1959 with the introduction of the 5xxA scopes. Its last year was 1968, having been superseded by the constant-bandwidth model 1A6.

K, L, and T are tied for longest production life, at 16 years. B, D, and G are next at 15 years.

Lavoie Laboratories produced an unauthorized clone, the Lavoie LA-265-D.

Internals

Some production runs used a pair of 5814 tubes at the input while others used 12AU7's. These two tube types have different heater currents, and because the heaters are series-wired, you cannot switch from one type to the other without circuit modification.

Specifications

please add

Pictures