File:Modified sampler with head-to-head leds.jpeg
Modified_sampler_with_head-to-head_leds.jpeg (640 × 480 pixels, file size: 132 KB, MIME type: image/jpeg)
Modified sampler channel, avoiding batteries. Using two head-to-head leds plus one resistor for replacing each battery. Adjustment by careful positioning, two emitting leds in series with one common series resistor. Red wire connects to series resistor on other side of board. Heads of leds are glued together using cyanoacrylate, each set in black shrink tubing.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 10:03, 12 January 2019 | 640 × 480 (132 KB) | Raymond (talk | contribs) | Modified sampler channel, avoiding batteries. Using two head-to-head leds plus one resistor for replacing each battery. Adjustment by careful positioning, two emitting leds in series with one common series resistor. Red wire connects to series resistor... |
You cannot overwrite this file.
File usage
The following page uses this file: