H: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
Vintage dave (talk | contribs) (add specs and history) |
||
| Line 1: | Line 1: | ||
The Tektronix Type H is a single-channel plug-in for [[500-series scopes]]. It provides two | The Tektronix Type H is a single-channel plug-in for [[500-series scopes]]. It provides two | ||
inputs and has a switch to select between them. The rise time of the plug-in is 20 nanoseconds. | inputs and has a switch to select between them. The rise time of the plug-in is 20 nanoseconds; bandwidth is 15MHz. | ||
The sensitivity ranges from 5mV/cm to 20V/cm. | The sensitivity ranges from 5mV/cm to 20V/cm. A compromise, Type H is not as fast as Type [[B]], but it is DC-coupled on all ranges. | ||
Some Type H's use a [[Turret attenuators|turret attenuator]]. | |||
Type 53/54H was introduced in 1958, along with the [[533]] and [[543]]. | |||
* http://w140.com/tek_fcp/tek_type_h_factory_cal_proc.pdf | * http://w140.com/tek_fcp/tek_type_h_factory_cal_proc.pdf | ||
Revision as of 17:20, 17 September 2010
The Tektronix Type H is a single-channel plug-in for 500-series scopes. It provides two inputs and has a switch to select between them. The rise time of the plug-in is 20 nanoseconds; bandwidth is 15MHz. The sensitivity ranges from 5mV/cm to 20V/cm. A compromise, Type H is not as fast as Type B, but it is DC-coupled on all ranges. Some Type H's use a turret attenuator.
Type 53/54H was introduced in 1958, along with the 533 and 543.
