Difference between revisions of "N"

From TekWiki
Jump to: navigation, search
Line 11: Line 11:
 
For calibration of the timebase of the Type N, the [[013-028|013-028 Timing Standard]] was produced.
 
For calibration of the timebase of the Type N, the [[013-028|013-028 Timing Standard]] was produced.
  
 
+
* [http://bama.edebris.com/manuals/tek/n Tektronix Type N Manual without schematics (BAMA)]
The manual (without schematics) is here:
+
* [http://w140.com/tektronix_type_n_schematics.pdf Tektronix Type N Schematics (PDF)]
 
+
* [http://w140.com/tek_fcp/tek_type_n_factory_cal_proc.pdf Tektronix Type N Factory Calibration Procedure (PDF)]
* http://bama.edebris.com/manuals/tek/n
 
 
 
The schematics are here:
 
 
 
* http://w140.com/tektronix_type_n_schematics.pdf
 
 
 
Factory Calibration procedure:
 
 
 
* http://w140.com/tek_fcp/tek_type_n_factory_cal_proc.pdf
 
  
 
<gallery>
 
<gallery>

Revision as of 16:37, 6 March 2011

The Tektronix Type N is a sampling plug-in introduced in 1960 for 500-series scopes. It was the first sampler produced by Tektronix. The risetime is specified to be under 600 picoseconds. The Type N is a complete sampling subsystem, using the 500-series oscilloscope just as a power supply and a display. The oscilloscope is operated in X-Y mode and gets its horizontal signal from the Type N plug-in instead of from the scope's sweep circuitry. The input connector is a 50-ohm GR-874. The Type N was introduced in 1960, followed by the 661 a year later, and discontinued in 1964, making it the shortest-lived plug-in.

For calibration of the timebase of the Type N, the 013-028 Timing Standard was produced.