N: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(creation)
 
(schematics)
Line 7: Line 7:
from the scope's sweep circuitry.  The input connector is a 50-ohm GR-874.
from the scope's sweep circuitry.  The input connector is a 50-ohm GR-874.
The Type N was followed by the [[661]] a year later.
The Type N was followed by the [[661]] a year later.
The manual (without schematics) is here:
* http://bama.edebris.com/manuals/tek/n
The schematics are here:
* http://w140.com/tektronix_type_n_schematics.pdf

Revision as of 19:44, 21 April 2010

The Tektronix Type N is a sampling plug-in introduced in 1960 for 500-series oscilloscopes. It is the first sampler sold by Tektronix. The risetime is specified to be under 600 picoseconds. The Type N is a complete sampling subsystem, using the 500-series oscilloscope just as a power supply and a display. The oscilloscope is operated in X-Y mode and gets its horizontal signal from the Type N plug-in instead of from the scope's sweep circuitry. The input connector is a 50-ohm GR-874. The Type N was followed by the 661 a year later.

The manual (without schematics) is here:

The schematics are here: