Difference between revisions of "O"

From TekWiki
Jump to: navigation, search
m (nowhere near longest, many lasted 16 if you count 53/54)
Line 8: Line 8:
 
discontinued=1974 |
 
discontinued=1974 |
 
manuals=
 
manuals=
* [http://bama.edebris.com/manuals/tek/o/ Tektronix Type O Manual (BAMA)]
+
* [http://w140.com/mmm/tek-o.pdf Tektronix Type O Manual (PDF)]
 +
* [http://bama.edebris.com/manuals/tek/o/ Tektronix Type O Manual (BAMA, offline?)]
 
* [http://w140.com/tek_fcp/tek_type_o_factory_cal_proc.pdf Tektronix Type O Factory Calibration Procedure (PDF)]
 
* [http://w140.com/tek_fcp/tek_type_o_factory_cal_proc.pdf Tektronix Type O Factory Calibration Procedure (PDF)]
 
* [http://w140.com/tek_type-o_1968_catalog.pdf Tektronix Type O in 1968 Catalog (PDF)]
 
* [http://w140.com/tek_type-o_1968_catalog.pdf Tektronix Type O in 1968 Catalog (PDF)]

Revision as of 14:44, 4 September 2017

Manuals – Specifications – Links – Pictures

The Tektronix Type O is a letter-series plug-in that contains two op-amps.

The input and feedback networks of the op-amps can be configured from the front panel using knobs and/or user-supplied components. There are sockets on the front panel for banana plugs.

Type O also has a regular signal input that does not involve the op-amps. A mode switch selects which op-amp's output will be displayed, or the regular signal input.

Regular signal bandwidth is 25 MHz, maximum sensitivity is 50 mV/div, op-amp gain-bandwidth product is 15 MHz, and open-loop DC gain is 2500.

Type O was introduced in mid-1962 and was available through 1973.

The Type O can be used with any of the following adapters: 013-081, 013-068, 013-048, 013-0048-01, 013-0049-01, 013-0086-00, 013-0067-00 (manual below).

Pictures