P510: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 2: Line 2:
Maximum voltage is 600 V peak-to-peak.
Maximum voltage is 600 V peak-to-peak.
It connects to the scope with a [[UHF connector]].
It connects to the scope with a [[UHF connector]].
It was made for slower Tek scopes, up to [[535|Type 535]].  The cable is standard 50 Ω coax, which rings above 10 MHz.
This aberration is not visible on slower displays, but the 30 MHz [[545|Type 545]] necessitated a new probe, the [[P410|P400 Series]].


* [http://w140.com/tek_p510a.pdf Tektronix P510A Schematic and Description (PDF)]
* [http://w140.com/tek_p510a.pdf Tektronix P510A Schematic and Description (PDF)]


[[Category:1 MOhm Oscilloscope Probes]]
[[Category:1 MOhm Oscilloscope Probes]]

Revision as of 10:05, 4 August 2017

The Tektronix P510A is a 10x passive voltage probe. Maximum voltage is 600 V peak-to-peak. It connects to the scope with a UHF connector.

It was made for slower Tek scopes, up to Type 535. The cable is standard 50 Ω coax, which rings above 10 MHz. This aberration is not visible on slower displays, but the 30 MHz Type 545 necessitated a new probe, the P400 Series.