P6000: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
(One intermediate revision by the same user not shown) | |||
Line 2: | Line 2: | ||
The '''Tektronix P6000''' is a 30 MHz, ×10 passive voltage probe designed for use with | The '''Tektronix P6000''' is a 30 MHz, ×10 passive voltage probe designed for use with | ||
oscilloscopes that have a 1 MΩ // 20 to 50 pF input impedance and a [[UHF connector]]. | oscilloscopes that have a 1 MΩ // 20 to 50 pF input impedance and a [[UHF connector]]. | ||
The [[P6003]] is a variant of the [[P6000]] that has a [[BNC connector]] instead of a UHF connector. | |||
Probe input impedance is 10 MΩ // 11.5 to 14.5 pF. | Probe input impedance is 10 MΩ // 11.5 to 14.5 pF. | ||
Line 17: | Line 18: | ||
* [http://w140.com/tek_p6000_old.pdf Tektronix P6000 Manual (older, PDF)] | * [http://w140.com/tek_p6000_old.pdf Tektronix P6000 Manual (older, PDF)] | ||
* [http://w140.com/tek_p6000_new.pdf Tektronix P6000 Manual (newer, PDF)] | * [http://w140.com/tek_p6000_new.pdf Tektronix P6000 Manual (newer, PDF)] | ||
* [http://w140.com/tek_p6000-to-p6005_parts.pdf Tek P6000 to P6005 Parts (PDF)] | |||
[[Category:1 MOhm Oscilloscope Probes]] | [[Category:1 MOhm Oscilloscope Probes]] |
Revision as of 16:55, 18 May 2017
The Tektronix P6000 is a 30 MHz, ×10 passive voltage probe designed for use with oscilloscopes that have a 1 MΩ // 20 to 50 pF input impedance and a UHF connector. The P6003 is a variant of the P6000 that has a BNC connector instead of a UHF connector.
Probe input impedance is 10 MΩ // 11.5 to 14.5 pF. Maximum voltage is 1200 V. The connection with the scope is with
The P6000 was made with four different cable lengths:
- 3.5 feet, part number 010-0020-00
- 6 feet, part number 010-0030-00
- 9 feet, part number 010-0035-00
- 12 feet, part number 010-0041-00