P6009: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
 
(6 intermediate revisions by 4 users not shown)
Line 1: Line 1:
The '''Tektronix P6009''' is a 120 MHz, 100× probe for scopes with 1 MΩ input impedance.  Maximum input voltage is 1.5 kV (at DC).
{{Probe Sidebar
|manufacturer=Tektronix
|model=P6009
|summary=120 MHz, 100×, Passive Probe
|image=Tek p6009 0.jpg
|caption=P6009 with readout BNC connector
|for=1 MΩ scope inputs
|introduced=(?)
|discontinued=(?)
|designers=
|manuals=
* [[Media:070-0401-01.pdf|Tektronix P6009 Manual]]
* [[Media:Tek p6009 20pf fcp may 1967.pdf|Tektronix P6009 Factory Calibration Procedure]]
* [[Media:Tek p6007 p6009 p6015 cat.pdf|Tektronix P6007 P6009 P6015 Catalog Description]]
}}
The '''Tektronix P6009''' is a 120 MHz, 100x, passive probe for scopes with 1 MΩ input impedance.


There are different connector options:
There are two different connector options:
* Part number 010-0170-00 is a P6009 with a 9 foot cable and a plain BNC connector.
* Part number 010-0170-00 is a P6009 with a 9 foot cable and a plain BNC connector.
* Part number 010-0264-01 is a P6009 with a 9 foot cable and a [[BNC connector with readout ring]]. The extra pin on BNC connector allows the probe's 100x attenuation to be detected. However the P6009 does not have an "Identify" switch.
* Part number 010-0264-01 is a P6009 with a 9 foot cable and a [[BNC connector with readout ring]]. The extra pin on BNC connector allows the probe's 100x attenuation to be detected. However the P6009 does not have an "Identify" switch.


==Manuals==
{{BeginSpecs}}
* [http://w140.com/tek_P6009.pdf Tektronix P6009 Manual (PDF)]
{{Spec | Attenuation | 100× ±3% with 1 MΩ ±2% scope input }}
* [http://w140.com/tek_p6007_p6009_p6015_cat.pdf Tektronix P6007 P6009 P6015 Catalog Description (PDF)]
{{Spec | Maximum Voltage | 1.5 kV DC + AC peak, derated above 200 kHz }}
* [[Media:Tek p6009 20pf fcp may 1967.pdf|Tektronix P6009 Factory Calibration Procedure]]
{{Spec | Compensation range | 15 - 47 pF }}
{{Spec | Bandwidth | 120 MHz }}
{{Spec | Input capacitance | 2.5 pF }}
{{EndSpecs}}


==Pictures==
==Pictures==
Line 21: Line 39:
Tek p6009 plain bnc.jpg|P6009 with plain BNC connector
Tek p6009 plain bnc.jpg|P6009 with plain BNC connector
Tek p6009 schematic.png|P6009 Schematic
Tek p6009 schematic.png|P6009 Schematic
Tek_Pobe_P6009_readout.jpg| different readout contact configurations: spring loaded pin (left) vs. spring metal clip with two contact points (right)
</gallery>
</gallery>


[[Category:1 MΩ Oscilloscope probes]]
[[Category:1 MΩ Oscilloscope probes]]
[[Category:High voltage oscilloscope probes]]
[[Category:High voltage oscilloscope probes]]
[[Category:Specifications needed]]
[[Category:6-32 probes]]

Latest revision as of 14:36, 22 December 2023

Tektronix P6009
120 MHz, 100×, Passive Probe
P6009 with readout BNC connector

Compatible with 1 MΩ scope inputs

Produced from (?) to (?)

Manuals


Manuals – Specifications – Links – Pictures

The Tektronix P6009 is a 120 MHz, 100x, passive probe for scopes with 1 MΩ input impedance.

There are two different connector options:

  • Part number 010-0170-00 is a P6009 with a 9 foot cable and a plain BNC connector.
  • Part number 010-0264-01 is a P6009 with a 9 foot cable and a BNC connector with readout ring. The extra pin on BNC connector allows the probe's 100x attenuation to be detected. However the P6009 does not have an "Identify" switch.

Key Specifications

Attenuation 100× ±3% with 1 MΩ ±2% scope input
Maximum Voltage 1.5 kV DC + AC peak, derated above 200 kHz
Compensation range 15 - 47 pF
Bandwidth 120 MHz
Input capacitance 2.5 pF

Pictures