Difference between revisions of "P6009"

From TekWiki
Jump to: navigation, search
m (Text replacement - "Category:1 MOhm Oscilloscope Probes" to "Category:1 MΩ Oscilloscope probes")
(Manuals)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
The '''Tektronix P6009''' is a 120 MHz, 100× probe for scopes with 1 MΩ input impedance.  Maximum input voltage is 1.5 kV (at DC).
 
The '''Tektronix P6009''' is a 120 MHz, 100× probe for scopes with 1 MΩ input impedance.  Maximum input voltage is 1.5 kV (at DC).
  
It has a contact for [[7000 series readout system|readout information]] (fixed 6.8 kΩ resistor) but no Identify switch.
+
There are different connector options:
 +
* Part number 010-0170-00 is a P6009 with a 9 foot cable and a plain BNC connector.
 +
* Part number 010-0264-01 is a P6009 with a 9 foot cable and a [[BNC connector with readout ring]]. The extra pin on BNC connector allows the probe's 100x attenuation to be detected. However the P6009 does not have an "Identify" switch.
  
 
==Manuals==
 
==Manuals==
 
 
* [http://w140.com/tek_P6009.pdf Tektronix P6009 Manual (PDF)]
 
* [http://w140.com/tek_P6009.pdf Tektronix P6009 Manual (PDF)]
 
* [http://w140.com/tek_p6007_p6009_p6015_cat.pdf Tektronix P6007 P6009 P6015 Catalog Description (PDF)]
 
* [http://w140.com/tek_p6007_p6009_p6015_cat.pdf Tektronix P6007 P6009 P6015 Catalog Description (PDF)]
* [[Media:Tek p6009 20pf fcp may 1967.pdf]]
+
* [[Media:Tek p6009 20pf fcp may 1967.pdf|Tektronix P6009 Factory Calibration Procedure]]
  
 
==Pictures==
 
==Pictures==
 
 
<gallery>
 
<gallery>
Tek p6009 0.jpg
+
Tek p6009 0.jpg|P6009 with readout BNC connector
Tek p6009 1.jpg
+
Tek p6009 1.jpg|P6009 with readout BNC connector
Tek p6009 2.jpg
+
Tek p6009 2.jpg|P6009 with readout BNC connector
 
Tek p6009 3.jpg
 
Tek p6009 3.jpg
Tek p6009 4.jpg
+
Tek p6009 4.jpg|P6009 with readout BNC connector
 
Tek p6009 5.jpg
 
Tek p6009 5.jpg
 
Tek p6009 screw-on tip.jpg
 
Tek p6009 screw-on tip.jpg
 +
Tek p6009 plain bnc.jpg|P6009 with plain BNC connector
 +
Tek p6009 schematic.png|P6009 Schematic
 
</gallery>
 
</gallery>
  

Latest revision as of 07:28, 14 January 2020

The Tektronix P6009 is a 120 MHz, 100× probe for scopes with 1 MΩ input impedance. Maximum input voltage is 1.5 kV (at DC).

There are different connector options:

  • Part number 010-0170-00 is a P6009 with a 9 foot cable and a plain BNC connector.
  • Part number 010-0264-01 is a P6009 with a 9 foot cable and a BNC connector with readout ring. The extra pin on BNC connector allows the probe's 100x attenuation to be detected. However the P6009 does not have an "Identify" switch.

Manuals

Pictures