P6032: Difference between revisions
No edit summary |
(added internal pictures) |
||
| Line 1: | Line 1: | ||
The P6032 is a high-speed cathode-follower probe. There is a miniature triode in the probe body. Like all active probes, the P6032 requires power, and for this reason it has two connectors at the scope end of cable. There is a four-pin power connector and a 50-Ohm GR connector for the signal. The triode has limited dynamic range, so attenuator attachments are provided that attach to the tip of the probe. These attenuators also reduce the loading of the probe on the probed circuit. The probe is rated to 850MHz. Because the probe contains a small triode, it gets slightly warm during operation. | The P6032 is a high-speed cathode-follower probe. There is a miniature triode in the probe body. Like all active probes, the P6032 requires power, and for this reason it has two connectors at the scope end of cable. There is a four-pin power connector and a 50-Ohm GR connector for the signal. The triode has limited dynamic range, so attenuator attachments are provided that attach to the tip of the probe. These attenuators also reduce the loading of the probe on the probed circuit. The probe is rated to 850MHz. Because the probe contains a small triode, it gets slightly warm during operation. | ||
<gallery> | |||
Image:p6032_ext.jpg|External view of P6032 without attenuator attachment. | |||
Image:p6032_int_c.jpg|Internal view of P6032 Probe tip connects directly to triode grid, which is a bare wire coming out of the top of the tube. | |||
Image:p6032_pwr.jpg|Internal view of power supply at end of P6032 cable. | |||
</gallery> | |||
Revision as of 05:34, 11 December 2008
The P6032 is a high-speed cathode-follower probe. There is a miniature triode in the probe body. Like all active probes, the P6032 requires power, and for this reason it has two connectors at the scope end of cable. There is a four-pin power connector and a 50-Ohm GR connector for the signal. The triode has limited dynamic range, so attenuator attachments are provided that attach to the tip of the probe. These attenuators also reduce the loading of the probe on the probed circuit. The probe is rated to 850MHz. Because the probe contains a small triode, it gets slightly warm during operation.
-
External view of P6032 without attenuator attachment.
-
Internal view of P6032 Probe tip connects directly to triode grid, which is a bare wire coming out of the top of the tube.
-
Internal view of power supply at end of P6032 cable.
