P64xx input leads: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
Logic probes from the '''Tektronix P64xx series''' share a common 10-lead input connector layout.
Logic probes from the '''Tektronix P64xx series''' share a common 10-lead input connector layout.


These probes include the [[P6406]], [[P6407]], [[P6408]], [[P6450]], [[P6451]], [[P6452]], [[P6460]], [[P6462]], and possibly others.
These probes include the [[P6406]], [[P6407]], [[P6408]], [[P6450]], [[P6451]], [[P6452]], [[P6455]], [[P6460]], [[P6462]], and possibly others.


Original input lead sets were
Original input lead sets were

Revision as of 13:28, 18 September 2017

Logic probes from the Tektronix P64xx series share a common 10-lead input connector layout.

These probes include the P6406, P6407, P6408, P6450, P6451, P6452, P6455, P6460, P6462, and possibly others.

Original input lead sets were

  • 012-0747-00 - standard 10-wire 10 in/25 cm with pluggable probe tips
  • 012-0989-00 - 10-wire 5 in/12 cm with pluggable probe tips
  • 012-0655-01 - ten individual 40 cm leads
  • 012-0655-02 - ten individual 8 cm leads
  • 012-0670-00 - ten individual 16 cm leads
  • 012-0800-00 - 10-wire 10 cm

As the the probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch, it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.