P64xx input leads: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
m (length)
 
(17 intermediate revisions by 5 users not shown)
Line 1: Line 1:
Logic probes from the '''Tektronix P64xx series''' share a common 10-lead input connector layout.
Logic probes from the '''Tektronix P64xx series''' share a common 10-lead input connector layout.


These probes include the [[P6406]], [[P6407]], [[P6408]], [[P6451]], [[P6460]], [[P6462]], and possibly others.
These probes include the [[P6406]], [[P6407]], [[P6408]], [[P6450]], [[P6451]], [[P6452]], [[P6455]], [[P6460]], [[P6462]], [[A6701]] and possibly others.


Original input lead sets were
Original input lead sets were
* 012-0386-00 − ten individual leads
* 012-0556-00 − diagnostic leads to connect [[P6460]] to diagnostic test points and test pattern generator outputs of [[1240]]/[[1241]] logic analyzers
* 012-0655-01 − ten individual 40 cm leads
* 012-0655-02 − ten individual 8 cm leads
* 012-0670-00 − ten individual 16 cm leads
* 012-0747-00 − standard 10-wire 10 in/25 cm with pluggable probe tips
* 012-0800-00 − 10-wire 10 cm
* 012-0926-00 − 20 twisted pair leads. Possibly provided with [[P6455]], [[P6456]] and [[P6457]] pattern generator probes.
* 012-0987-00 − 10-wire 5 in/12 cm with pluggable probe tips [[P6460]]
* 012-0989-00 − 10-wire 5 in/12 cm with pluggable probe tips
* 012-0990-00 − 2 pin interface to single grabber
* [[012-1000-00]] − diagnostic lead set for the [[P6452]] logic probe.
* [[012-1053-00]] − 16 twisted pair leads plus 2 grabbers for [[P6452]]
* [[103-0209-00]] − 2 x ten bundled leads connecting to a standard [[GPIB connector]], to be used with two probes. Supplied with the [[DF2]]


* 012-0747-00 - standard 10-wire 10 in/25 cm with pluggable probe tips
As the probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch,
* 012-0989-00 - 10-wire 5 in/12 cm with pluggable probe tips
it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
* 012-0655-01 - ten individual 40 cm leads
* 012-0655-02 - ten individual 8 cm leads
* 012-0670-00 - ten individual 16 cm leads
* 012-0800-00 - 10-wire 10 cm


As the the probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch,
==Instructions==
it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
* [[Media:070-4675-00.pdf|Instructions for 012-0556-00 diagnostics leads]]


==Pictures==
<gallery>
<gallery>
P6408 1.jpg      | [[P6408]] with 012-0747-00 harness and clips
P6408 1.jpg      | [[P6408]] with 012-0747-00 harness and clips
P64xx-jumper.jpg | Using P64xx probes with jumper wires
P64xx-jumper.jpg | Using P64xx probes with jumper wires
012-0556-00_01.jpg | 012-0556-00
012-0747-00_01.jpg | 012-0747-00 Standard 10 lead set
012-0926-00_01.jpg | 012-0926-00
012-0987-00_01.jpg | 012-0987-00
012-0990-00_01.jpg | 012-0990-00 Grabber with 2 pin interface for 64xx probes.
012-0990-00_02.jpg | 012-0990-00
</gallery>
</gallery>
[[Category:Cables]]
[[Category:Logic analyzer probes]]

Latest revision as of 18:00, 18 August 2023

Logic probes from the Tektronix P64xx series share a common 10-lead input connector layout.

These probes include the P6406, P6407, P6408, P6450, P6451, P6452, P6455, P6460, P6462, A6701 and possibly others.

Original input lead sets were

  • 012-0386-00 − ten individual leads
  • 012-0556-00 − diagnostic leads to connect P6460 to diagnostic test points and test pattern generator outputs of 1240/1241 logic analyzers
  • 012-0655-01 − ten individual 40 cm leads
  • 012-0655-02 − ten individual 8 cm leads
  • 012-0670-00 − ten individual 16 cm leads
  • 012-0747-00 − standard 10-wire 10 in/25 cm with pluggable probe tips
  • 012-0800-00 − 10-wire 10 cm
  • 012-0926-00 − 20 twisted pair leads. Possibly provided with P6455, P6456 and P6457 pattern generator probes.
  • 012-0987-00 − 10-wire 5 in/12 cm with pluggable probe tips P6460
  • 012-0989-00 − 10-wire 5 in/12 cm with pluggable probe tips
  • 012-0990-00 − 2 pin interface to single grabber
  • 012-1000-00 − diagnostic lead set for the P6452 logic probe.
  • 012-1053-00 − 16 twisted pair leads plus 2 grabbers for P6452
  • 103-0209-00 − 2 x ten bundled leads connecting to a standard GPIB connector, to be used with two probes. Supplied with the DF2

As the probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch, it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.

Instructions

Pictures