P64xx input leads: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
m (length)
 
(8 intermediate revisions by 5 users not shown)
Line 4: Line 4:


Original input lead sets were
Original input lead sets were
 
* 012-0386-00 − ten individual leads
* 012-0747-00 − standard 10-wire 10 in/25 cm with pluggable probe tips
* 012-0556-00 − diagnostic leads to connect [[P6460]] to diagnostic test points and test pattern generator outputs of [[1240]]/[[1241]] logic analyzers
* 012-0989-00 − 10-wire 5 in/12 cm with pluggable probe tips
* 012-0655-01 − ten individual 40 cm leads
* 012-0655-01 − ten individual 40 cm leads
* 012-0655-02 − ten individual 8 cm leads
* 012-0655-02 − ten individual 8 cm leads
* 012-0670-00 − ten individual 16 cm leads
* 012-0670-00 − ten individual 16 cm leads
* 012-0800-00 − 10-wire 10 cm  
* 012-0747-00 − standard 10-wire 10 in/25 cm with pluggable probe tips
* 012-0556-00 − diagnostic leads to connect [[P6460]] to diagnostic test points and test pattern generator outputs of [[1240]]/[[1241]] logic analyzers
* 012-0800-00 − 10-wire 10 cm
* [[103-0209-00]] - 2 x ten bundled leads connecting to a standard [[GPIB connector]] ,to be used with two probes. Supplied with the [[DF2]]
* 012-0926-00 − 20 twisted pair leads. Possibly provided with [[P6455]], [[P6456]] and [[P6457]] pattern generator probes.
* 012-0987-00 − 10-wire 5 in/12 cm with pluggable probe tips [[P6460]]
* 012-0989-00 − 10-wire 5 in/12 cm with pluggable probe tips
* 012-0990-00 − 2 pin interface to single grabber
* [[012-1000-00]] − diagnostic lead set for the [[P6452]] logic probe.
* [[012-1053-00]] − 16 twisted pair leads plus 2 grabbers for [[P6452]]
* [[103-0209-00]] 2 x ten bundled leads connecting to a standard [[GPIB connector]], to be used with two probes. Supplied with the [[DF2]]


As the the probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch,
As the probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch,
it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
==Instructions==
==Instructions==
* [[Media:012-0556-00.pdf |Instructions for diagnostics leads]]
* [[Media:070-4675-00.pdf|Instructions for 012-0556-00 diagnostics leads]]
 
==Pictures==
==Pictures==
<gallery>
<gallery>
P6408 1.jpg      | [[P6408]] with 012-0747-00 harness and clips
P6408 1.jpg      | [[P6408]] with 012-0747-00 harness and clips
P64xx-jumper.jpg | Using P64xx probes with jumper wires
P64xx-jumper.jpg | Using P64xx probes with jumper wires
012-0556-00_01.jpg | 012-0556-00
012-0747-00_01.jpg | 012-0747-00 Standard 10 lead set
012-0926-00_01.jpg | 012-0926-00
012-0987-00_01.jpg | 012-0987-00
012-0990-00_01.jpg | 012-0990-00 Grabber with 2 pin interface for 64xx probes.
012-0990-00_02.jpg | 012-0990-00
</gallery>
</gallery>



Latest revision as of 18:00, 18 August 2023

Logic probes from the Tektronix P64xx series share a common 10-lead input connector layout.

These probes include the P6406, P6407, P6408, P6450, P6451, P6452, P6455, P6460, P6462, A6701 and possibly others.

Original input lead sets were

  • 012-0386-00 − ten individual leads
  • 012-0556-00 − diagnostic leads to connect P6460 to diagnostic test points and test pattern generator outputs of 1240/1241 logic analyzers
  • 012-0655-01 − ten individual 40 cm leads
  • 012-0655-02 − ten individual 8 cm leads
  • 012-0670-00 − ten individual 16 cm leads
  • 012-0747-00 − standard 10-wire 10 in/25 cm with pluggable probe tips
  • 012-0800-00 − 10-wire 10 cm
  • 012-0926-00 − 20 twisted pair leads. Possibly provided with P6455, P6456 and P6457 pattern generator probes.
  • 012-0987-00 − 10-wire 5 in/12 cm with pluggable probe tips P6460
  • 012-0989-00 − 10-wire 5 in/12 cm with pluggable probe tips
  • 012-0990-00 − 2 pin interface to single grabber
  • 012-1000-00 − diagnostic lead set for the P6452 logic probe.
  • 012-1053-00 − 16 twisted pair leads plus 2 grabbers for P6452
  • 103-0209-00 − 2 x ten bundled leads connecting to a standard GPIB connector, to be used with two probes. Supplied with the DF2

As the probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch, it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.

Instructions

Pictures