P64xx input leads
Logic probes from the Tektronix P64xx series share a common 10-lead input connector layout.
Original input lead sets were
- 012-0747-00 − standard 10-wire 10 in/25 cm with pluggable probe tips
- 012-0989-00 − 10-wire 5 in/12 cm with pluggable probe tips
- 012-0655-01 − ten individual 40 cm leads
- 012-0655-02 − ten individual 8 cm leads
- 012-0670-00 − ten individual 16 cm leads
- 012-0800-00 − 10-wire 10 cm
- 012-0556-00 − diagnostic leads to connect P6460 to diagnostic test points and test pattern generator outputs of 1240/1241 logic analyzers
- 103-0209-00 - 2 x ten bundled leads connecting to a standard GPIB connector ,to be used with two probes. Supplied with the DF2
As the the probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch, it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
P6408 with 012-0747-00 harness and clips