Difference between revisions of "Pacific Measurements 1038"

From TekWiki
Jump to: navigation, search
m
Line 71: Line 71:
 
==Pictures ==
 
==Pictures ==
 
<gallery>
 
<gallery>
Pacific Measurements 1038.jpg  | 1038 bench model
+
Pacific Measurements 1038.jpg  | 1038-D11 H/V bench model
Pacific Measurements 1038 rear.jpg | 1038 bench model, rear
+
Pacific Measurements 1038 rear.jpg | 1038-D11 bench model, rear
D10_Mainframe_PM1038_System.jpg
+
D10_Mainframe_PM1038_System.jpg | 1038-D10 H/V bench model
D10_Mainframe_rackmount_PM1038_System.jpg | 1038 rack model
+
D10_Mainframe_rackmount_PM1038_System.jpg | 1038-D10 H/V rack model
D10_Mainframe_rackmount_PM1038_System_rear.jpg
+
D10_Mainframe_rackmount_PM1038_System_rear.jpg | 1038-D10 rack model, rear
PacificMeasurements_1038_D14_H13_V12_front.jpg
+
PacificMeasurements_1038_D14_H13_V12_front.jpg | 1038-D14 H/V bench model
PacificMeasurements_1038_D14_H13_V12_rear.jpg
+
PacificMeasurements_1038_D14_H13_V12_rear.jpg | 1038-D14 bench model, rear
WavetekD14A_PM1038-N10_front.jpg
+
WavetekD14A_PM1038-N10_front.jpg | 1038-D14A N10 rack model
WavetekD14A_PM1038-N10_back.jpg
+
WavetekD14A_PM1038-N10_back.jpg | 1038-D14A rack model, rear
1038_NS20_1200x900_cropped.jpg
+
1038_NS20_1200x900_cropped.jpg | 1038-D14 NS20 bench model
Wavetek_1038_NS201_front_600x450.jpg
+
Wavetek_1038_NS201_front_600x450.jpg | 1038-NS201
Wavetek_1038_Ns201_600x450.jpg
+
Wavetek_1038_Ns201_600x450.jpg | 1038-NS201 rear
 
</gallery >
 
</gallery >
  

Revision as of 17:22, 25 April 2019

Manuals – Specifications – Links – Pictures

The Pacific Measurements 1038 is a 1 or 2 channel scalar network analyzer incorporating a Tektronix D10 (P-7 long persistance phosphor), D11 storage (Split Screen Storage) or [D14] 5000-series scopes display unit mainframe with optional rack mount and IEEE bus.

Options were available for:

  • Horizontal Plug-Ins H10 (Sweep drive), H11 (Sweep Drive and memory address circuits), H12 (Sweep drive and ratio channel), H13 (Sweep drive, memory address circuits and ratio channel) and K11 (Replaces H11 and provides amplitude sweep).
  • Vertical Plug-Ins V10 (Log amp and signal conditioning), V11 (Log amp, signal conditioning and 256 point memory), V12 (Log amp, signal conditioning and 1024 point memory), V13 (Log amp, signal conditioning, recording of two calibration curves and 1024 point memory) and V20 (Linear amp, 1024 point memory and for use in conjunction with Model 1018B power meter).
  • N10 Plug-In (2 Channel Network Analyzer).
  • NS20 Plug-In (2 Channel Network Analyzer) with optional NS201 (2 to 18.5 GHz RF Source Module).
  • C10 Plug-In Calibration Fixture and Extender Kit for direct calibration and check out of the D14/D14A Mainframe. It has extension cables to permit calibration and maintenance of the H/V system plug-ins.
  • Power Input Calibrator Unit (Detector Simulator - P/N 15484) will act as a "Standard" detector to furnish accurate voltages to the H/V system when it is desired to calibrate the amplitde correction circuitry.

Pacific Measurements later became part of Wavetek.

Specifications

     — H/V System
Offset Range ±99.9 dB, 3 digits resolution, accuracy ±0.02 dB/10 dB ±0.05 dB
Drift @ 0 dBm, <0.01 dB/°C (+15° to +45°C );
@ -40 dBm, <0.5 dB/24 Hrs at constant temperature )
Frequency Range 100 kHz to 18.5 GHz ;
with single diode (P/N 15272) or balanced (P/N 15285) detector, 1 MHz to 26.5 GHz ;
Wavetek Pacific Measurements waveguide detector (P/N 15882), 26.5 GHz to 40.0 GHz ;
other waveguide manufacturers, up to 110 GHz
Power −50 dBm to +10 dBm
Dynamic Range 60 dB (Reference Channel: 40 dB)
Reading Insertion Loss/Gain and Return Loss, 0.02 dB resolution
Noise Floor −70 dB
Power Approx. 100 VA @ 50 − 440 Hz; 100, 120, 240 VAC ±10%
Dimensions Bench Mount (H x W x D)
Weight 18.2 kg (40 lbs) - Vertical Plug-In 2.3 kg (5 lbs), Horizontal Plug-In
     — Power Detectors (P/Ns 15272, 13782 and 13783 unless noted)
Input Impedance 50 Ω nominal
Input Power max. +23 dBm (200 mV) peak or average
Return Loss >25.0 dB, SWR <1.12 from 1 MHz to 1 GHz;
>18.0 dB, SWR <1.29 from 2 GHz to 12.4 GHz;
>14.0 dB, SWR <1.50 up to 26.5 GHz
Accuracy 3% to 18.5 GHz and 5% to 26.5 GHz
Flatness ±0.5 dB to 18.5 GHz (P/N 15272);
±1.0 dB 18.5 GHz to 26.5 GHz (P/N 15272) ;
±1.0 dB to 18.5 GHz (P/N 13782) ;
±1.0dB to 18.5 GHz (P/N 13783;
±2.0 dB with type N or APC7 connectors to 18 GHz, ±2.0 dB to 26.5 GHz with APC3.5 connectors
     — Power Detector P/N 15882
Input Power max. +20 dBm (100 mV) peak or average
Return Loss >10 dB, SWR <1.92 from 26.5 to 40 GHz
Accuracy 5% from 26.5 to 40 GHz
Flatness ±2.0 dB from 26.5 to 40 GHz
Temperature 0° to 50°C operating, -50° to +65°C non-operating
Accuracy 0.2 dB to 2 dB from 30 MHz to 26.5 GHz, 0.5 dB to 2 dB from 26.5 GHz to 40 GHz
Cable Length 1.5 m (5 ft)
Weight Approx. 230 g (8 oz)

Prices

Please add

Links

Pictures