Q: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
(One intermediate revision by one other user not shown)
Line 8: Line 8:
series=[[500-series scopes]]|
series=[[500-series scopes]]|
manuals=
manuals=
* [http://w140.com/mmm/tek-q.pdf Tektronix Type Q Manual (PDF)]
* [[Media:070-199.pdf|Tektronix Type Q Manual (PDF)]]
* [http://bama.edebris.com/manuals/tek/q/ Tektronix Type Q Manual @ BAMA]
* [http://bama.edebris.com/manuals/tek/q/ Tektronix Type Q Manual @ BAMA]
* [http://w140.com/tek_fcp/tek_type_q_factory_cal_proc.pdf Tektronix Type Q Factory Calibration Procedure (PDF)]
<!-- * [http://w140.com/tek_fcp/tek_type_q_factory_cal_proc.pdf Tektronix Type Q Factory Calibration Procedure (PDF)] -->
 
* [[Media:tek_type_q_fcp.pdf|Tektronix Type Q Factory Calibration Procedure (PDF, OCR)]]
* [[Media:tek_type_q_fcp.pdf|Tektronix Type Q Factory Calibration Procedure (PDF, OCR)]]
}}
}}

Revision as of 12:00, 7 March 2019

Template:Plugin Sidebar 2 The Tektronix Type Q is a transducer and strain gauge preamp plug-in for 500-series scopes.

It can work with resistive, capacitive, or inductive transducers or strain gauges that are attached via an Amphenol 165-15 connector.

The plug-in contains a 25 kHz oscillator that is used to drive a Wheatstone bridge. This AC excitation / demodulation principle limits signal bandwidth to 6 kHz.

Type Q was introduced in 1960 and was the last all-tube plug-in. It was dropped after 1972.

Specifications

please add

Pictures