RSA-DKIT

From TekWiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Tektronix RSA-DKIT
USB Demo Kit for Spectrum Analyzers
Tektronix RSA-DKIT

Produced from (?) to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The RSA-DKIT is a demonstration kit for USB spectrum analyzers which produces 16 different signals to help users learn spectrum analysis and measurement methods.

Internal signals consist of:

  • Continuous 24415.312 MHz sine wave, –5 dBm
  • Infrequent hop -5 dBm CW signal centered around 2445.312 MHz which will hop to 2458.2 MHz every 1.28 seconds for approximately 155 µs
  • CW pulse centered around 2445.312 GHz ON for 10 µs and OFF for 90 µs
  • Linear FM pulse with a carrier at 2445.312 MHz and a linear chirp in a 10 MHz sweep
  • Pulse train consisting of two 100-pulse patterns separated by 5 ms and repeated once every second
  • QPSK 1 carrier at 2445.312 GHz with a symbol rate of 3.072 MS/sec and a PRBS9 pattern
  • QPSK 2 carrier at 2445.312 GHz with a symbol rate of 3.84 MS/sec and a PRBS11 pattern
  • OFDM (801.11p) standard 100 MHz wide packet that repeats every 2 ms
  • AM carrier at 2445.312 MHz at a modulation rate of 1.00 kHz
  • FM carrier at 2445.312 MHz at a modulation rate of 1.00 kHz
  • SPECMON continuous 10 MHz LFM pulse superimposed with a FM signal -40 dB down
  • Spur search consisting of a two-tone waveform with tones at +1 MHz and +4 MHz relative to the center frequency of 2445.312 MHz
  • Waveform 15 (P25 C4FM) is a P25 standard continuous C4FM signal with a bandwidth of 12.5 kHz
  • Waveform 16 (P25 HCPM) is a P25 standard continuous HCPM (Inbound) signal with a bandwidth of 12.5 kHz

Inputs and outputs consist of:

  • USB: Two USB 1.0/2.x ports for power, minimum 800 mA minimum
  • External I and Q inputs: DC to 5 MHz, 50 Ω inputs, 1 Vp-p (+4 dBm) maximum
  • Baseband I and Q outputs: DC to 5 MHz, 50 Ω inputs, ±100 mV into 50 Ω
  • RF output: 50 Ω BNC connector female
  • Noise source bias input: 0 V (disable) or +28 V (enable), 17 mA nominal
  • Noise Out: Produces -20 dB excess noise from 10 MHz to 3 GHz when powered by an external +28 V

Included Accessories are N (male) to BNC (female) adapter, whip antenna, and printed demo guide

Pictures