T5470: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
The '''Tektronix T5470''' | The '''Tektronix T5470''' is a 5 inch electrostatic deflection CRT used in the [[543|543B]], [[544]], [[545|545B]], [[546]], and [[547]]. | ||
It has an aluminized round flat face with 6 cm of usable vertical scan, | It has an aluminized round flat face with 6 cm of usable vertical scan, | ||
Line 8: | Line 8: | ||
The [[519]] has a very different CRT, but the same specified dot size as the 154-0478-00. | The [[519]] has a very different CRT, but the same specified dot size as the 154-0478-00. | ||
Part numbers: | |||
* 154-0478-01 = P2 phosphor | |||
* 154-0478-02 = P7 phosphor | |||
* 154-0478-03 = P11 phosphor | |||
* 154-0478-00 (T5470-31-2) = P31 phosphor | |||
==Data== | ==Data== |
Revision as of 09:55, 17 December 2018
The Tektronix T5470 is a 5 inch electrostatic deflection CRT used in the 543B, 544, 545B, 546, and 547.
It has an aluminized round flat face with 6 cm of usable vertical scan, and a helical post-accelerator. The entire envelope is made of glass.
The T5470 has a specified dot size of 0.004", quite a bit tighter than the dot on higher-bandwidth CRTs that use an expansion mesh.
The 519 has a very different CRT, but the same specified dot size as the 154-0478-00.
Part numbers:
- 154-0478-01 = P2 phosphor
- 154-0478-02 = P7 phosphor
- 154-0478-03 = P11 phosphor
- 154-0478-00 (T5470-31-2) = P31 phosphor
Data
Pictures
-
Tek 547 CRT
-
Tek 547 CRT Side View
-
Tek 547 CRT Deflection Plates & Assembly
-
Tek 547 CRT Electron Gun Assembly