TDS754: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 9: Line 9:
* [http://w140.com/manual_TDS754A.pdf TDS 500B, TDS 600B, and TDS 700A Digitizing Oscilloscopes 070-9719-00 (PDF)]
* [http://w140.com/manual_TDS754A.pdf TDS 500B, TDS 600B, and TDS 700A Digitizing Oscilloscopes 070-9719-00 (PDF)]
}}
}}
The '''Tektronix TDS754''' is a 500 MHz, 4 GS/s quad-channel digital storage scope.
The '''Tektronix TDS754''' is a 500 MHz, 2 GS/s quad-channel digital storage scope.


{{BeginSpecs}}
{{BeginSpecs}}

Revision as of 11:03, 23 November 2019

{{{manufacturer}}} 
500 MHz, 2 GS/s 4-channel digital scope

Produced from (?) to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix TDS754 is a 500 MHz, 2 GS/s quad-channel digital storage scope.

Key Specifications

Bandwidth and Channels 500 MHz; 2 Channels
Vertical Sensitivity 1 mV to 10 V/div with calibrated fine adjustment
Time Base Range 500 ps to 10 s/div
Sample Rate 2.0 GS/s on 1 channel ; 2.0 GS/s on 2 channels ; 1 GS/s on 3 or 4 channels
Record Length 50 K points each channel
Record Length (1M Option) 500 K points on 1 channel; 250 k points on 2 channels ; 130 k points on 3 or 4 channels
Record Length (2M Option) 8 M points on 1 channel; 4 M points on 2 channels ; 2 M points on 3 or 4 channels
Interface GPIB standard ; RS-232 interface  ; Centronics interface

Links

Internals

Note that the TDS754C&D and TDS784C&D series are nearly identical, with the differences being in front-panel cosmetics and the presence (754) or absence (784) of a few capacitors on the acquisition board. The only other difference is the position of instrument ID jumpers, also on the acquisition board. In fact, it is entirely possible to convert a 754 to a 784 (see abVe Links and the TDS784 page for more information).


Importante notice for TDS700D Series: Checking of acquisition board variant is very important. Mixing of CPU Board with Firmware 7.xx with old Acquisition board is impossible. CPU board with old Firmware 6.xx doesn't run with new acquisition board. In this case is both board's part number "671-4349-00". It tells: It is not safetly indicator for difference firmware.


Pictures of TDS754C

Pictures of TDS754D

Assembly part numbers

Assy Description TDS754A P/N TDS754C P/N TDS754D P/N
A10 Acquisition board 671-1476-05 671–4039–01 679-4165-0x/679-4771-01
A10 Acquisition board (1M Opt.) - 671–4041–00 679-4166-0x/679-4771-01
A10 Acquisition board (2M Opt.) - - 679-4771-01
A11 DRAM/CPU/Display board (inlc. 1M Opt.) - 671–4003–00 / 671–4172–00 671–4172–00 / 671-4349-00
A11 DRAM/CPU/Display board (only 2M Opt.) - - -
A12 Front panel assembly - 614–0937–02 614–0953–00
A14 D1 Bus - 671-2847-00 671-2847-00
A14 D1 Bus (Opt. 05) - 671-2848-00 671-2848-00
A15 Attenuator assembly - - -
A16 Power supply unit - 620–0063–04 620-0063-05
A20 CRT Display assembly - 640–0077–04 640–0077–11
A23 RS232/Centronics assembly 640-2437-00 640-2437-00 640-2437-00