Difference between revisions of "THS720"

From TekWiki
Jump to: navigation, search
(start of THS series updates)
Line 1: Line 1:
 +
[[Image:Ths720std-comp.jpg|thumb|400px|right|Tektronix THS720 Std probe compensation]]
 +
 
The Tektronix THS720 is a portable 100 MHz 500 MS/s (each channel) two
 
The Tektronix THS720 is a portable 100 MHz 500 MS/s (each channel) two
 
channel digital oscilloscope.  There were two variants, the THS720 STD
 
channel digital oscilloscope.  There were two variants, the THS720 STD
Line 17: Line 19:
 
See [[THS700]].
 
See [[THS700]].
  
 +
==Pictures==
 +
<gallery>
 +
File:Ths720std-comp.jpg|THS720 Std displaying probe compensation waveform
 +
File:ths720std-backpcb.jpg|THS720 back of PCB
 +
</gallery>
  
 
[[Category:THS series scopes]]
 
[[Category:THS series scopes]]

Revision as of 15:29, 20 October 2014

Tektronix THS720 Std probe compensation

The Tektronix THS720 is a portable 100 MHz 500 MS/s (each channel) two channel digital oscilloscope. There were two variants, the THS720 STD and the THS720A. The primary difference is that the THS720A will trigger from the DMM input.

Internals

Primary microprocessor is the Motorola/Freescale MC68331CFC16. There is also an Intel flash E28F008SA120 for setup, cal and waveform storage.

Repair Issues

The service manual shows how to remove the calibration protection jumper. The DMM calibration step requires a good calibrator capable of doing 850 VDC, and 600 VAC at 500 Hz.

See THS700.

Pictures