Difference between revisions of "W"

From TekWiki
Jump to: navigation, search
m
m
Line 25: Line 25:
 
while the other modes provide "slideback" measurements of small variations superimposed on a large constant.   
 
while the other modes provide "slideback" measurements of small variations superimposed on a large constant.   
  
An output of V<sub>c</sub> is provided on the front panel of the Type W.  Unlike the [[Z|Type Z]],
+
An output of V<sub>c</sub> is provided on the front panel of the Type W.  Unlike the Z,
 
Type W has two gain axes, a decade attenuator and a 1-2-5-10-20-50 selector,  
 
Type W has two gain axes, a decade attenuator and a 1-2-5-10-20-50 selector,  
 
reminiscent of [[D|Type D]] from ten years before.
 
reminiscent of [[D|Type D]] from ten years before.

Revision as of 16:58, 2 August 2017

Tektronix Type W
8-23 MHz differential comparator
Type W front view

Compatible with 500-series scopes

Produced from 1965 to 1974

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix Type W is a differential comparator plug-in amplifier for 500-series scopes. Its bandwidth varies from 23 MHz to 8 MHz depending on gain. Only modestly faster than its Type Z predecessor, Type W extends performance in terms of sensitivity, reaching 1 mV/div.

It achieves 20,000 to 1 common-mode rejection at DC and low frequencies. It has a built in precision variable voltage supply, "Vc", which is controlled by a ten-turn pot and can vary from either -1.1 V to +1.1 V or -11 V to +11 V.

Type W has two signal inputs, "A" and "B". A mode switch selects between displaying A-Vc, A-B, or Vc-B. The "A-B" mode is particularly useful for displaying the current in a sense resistor, while the other modes provide "slideback" measurements of small variations superimposed on a large constant.

An output of Vc is provided on the front panel of the Type W. Unlike the Z, Type W has two gain axes, a decade attenuator and a 1-2-5-10-20-50 selector, reminiscent of Type D from ten years before.

Type W is the only letter-series plug-in with an "infinite resistance" input mode selectable at the front panel. (Type 1A5 has an internal jumper that can be cut.)

In the letter-series timeline of differential comparators, Type W, introduced in 1965, follows Type Z and precedes Type 1A5.

Specifications

please add

Pictures