Z: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(35 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{Plugin Sidebar 2|
{{Plugin Sidebar  
title=Tektronix Type Z|
|manufacturer=Tektronix
summary=Comparator preamp plug-in|
|series=500-series scopes
image=Tek z front.jpg |  
|type=Type Z
caption=Type Z front view|
|summary=Comparator preamp plug-in
introduced=1960 |
|image=Tek Type Z front.jpg
discontinued=1968 |
|caption=Type Z front view
series=[[500-series scopes]]|
|introduced=1960  
manuals=
|discontinued=1969
* [http://bama.edebris.com/manuals/tek/z/ Tektronix Type Z Manual (BAMA)]
|designers=Charlie Rhodes;Ron Olson
* [http://w140.com/tek_fcp/tek_type_z_factory_cal_proc.pdf Tektronix Type Z Factory Calibration Procedure (PDF)]
|manuals=
* [[Media:070-251.pdf|Tektronix Type Z Manual]] (OCR)
* [[Media:tek_type_z_fcp.pdf|Tektronix Type Z Factory Calibration Procedure]]
* [[Media:Tek type z cal outline.pdf|Tektronix Type Z Calibration Outline]] (OCR)
}}
}}
The '''Tektronix Type Z''' is a comparator plug-in for [[500-series scopes]].
The '''Tektronix Type Z''' is a comparator plug-in for [[500-series scopes]], [[introduced in 1960]] and dropped after 1968.
Its two main subsystems are a differential amplifier and a precision variable
It was designed by [[Charlie Rhodes]] and [[Ron Olson]].
DC voltage source, which can be used as one of the amplifier inputs.
This allows DC-coupled measurements of small signals with large DC offsets.
Its maximum sensitivity is 50 mV/div, and it achieves 40,000 to 1 common-mode
rejection at DC and low frequencies.  Its risetime as a general-purpose
amplifier is 27 ns (13 MHz bandwidth), but it can track a common-mode risetime of 7 ns.


The Type Z has two inputs, A and B, plus a precision comparison voltage, V<sub>C</sub>, that is
The Type Z has two inputs, A and B, plus a precision comparison voltage, V<sub>C</sub>, that is
adjustable from 0 to +/-1 V, 10 V, or 100 V via a ten-turn pot.  It's possible to
adjustable from 0 to ±1 V, 10 V, or 100 V via a ten-turn pot.   
view V<sub>A</sub>, -V<sub>B</sub>, V<sub>A</sub>-V<sub>B</sub>, V<sub>A</sub>-V<sub>C</sub>, or V<sub>C</sub>-V<sub>B</sub>.
 
The following differential amplifier can be configured to display V<sub>A</sub>, −V<sub>B</sub>,  
V<sub>A</sub>−V<sub>B</sub>, V<sub>A</sub>−V<sub>C</sub>, or V<sub>C</sub>−V<sub>B</sub>.
 
This allows DC-coupled measurements of small signals with large DC offsets. 


Unlike later comparators, it has a separate step attenuator for each input,
Unlike later comparators, Type Z has separate step attenuators for each input,
permitting the user to view the difference between signals of widely differing amplitudes.
permitting the user to view the difference between signals of widely differing amplitudes.
It is also the only comparator that can handle +/- 100 V common mode at full sensitivity.
Unfortunately the divider resistors have no trim, so CMRR is poor except at 50mV/div.
The Type Z uses two [[turret attenuators]].
 
It is also the only comparator that can handle ±100 V common mode at full sensitivity.


With a pair of "Disconnect Signal" buttons, the Type Z was the first of the
With a pair of "Disconnect Signal" buttons, the Type Z was the first  
movement toward a "GND" position on the input switches.
movement toward a "GND" position on the input switches.


The Type Z was [[introduced in 1960]] and uses both tubes and transistors,
The Type [[P6023]] probe with R and C compensation, [[introduced in 1962]],
capitalizing on the strengths of each.  It was dropped after 1968.
 
The Type [[P6023]] probe, [[introduced in 1962]] with R and C compensation,
was specifically designed for the Type Z but also marketed for the Type [[G]].
was specifically designed for the Type Z but also marketed for the Type [[G]].


==Specifications==
==Specifications==
[[Category:Specifications needed]] ''please add''
Maximum sensitivity is 50 mV/div, and common-mode rejection is 40,000:1 "from DC through audio frequencies".
 
Risetime as a general-purpose amplifier is 27 ns (13 MHz bandwidth).  A side effect of Type Z's unprecedented dynamic range is that transient response is a function of signal amplitude: slew rates faster than 1V in 6ns will cause distortion due to grid current.
 
[[Category:Specifications needed]]
 
==Internals==
The Type Z uses both tubes and transistors, capitalizing on the strengths of each. 
 
The step attenuators are [[turret attenuators]].
 
==Prices==
* $525 in 1962 (~$5,300 in 2023 dollars)


==Links==
==Links==
Line 46: Line 58:


<gallery>
<gallery>
Tek z front.jpg|Front View
Tek Type Z front.jpg |Front view
Tek z front.jpg|3/4 View
Tek z 1.jpg| Front View
Tek z 7.jpg | Front View
Tek type z pre-prod.jpg|Pre-production Type Z with different knob color
Tek z left.jpg|Left Side
Tek z left.jpg|Left Side
Tek_z_schem.png|Schematic
Tek z 5.jpg | Left Side
Tek_TypeZ-RHS.jpeg | Right Side
Tek z 2.jpg | Right Side
Tek z 3.jpg | Right Side
Tek z 6.jpg | Right Side  Tubes
Tek_TypeZ-Top.jpeg  | Top
Tek z 4.jpg | Rear
Tek type z front2.jpeg
</gallery>
 
===Schematics===
<gallery>
Tek_z_turret.png|Attenuators
Tek_z_turret.png|Attenuators
Tek z 1.jpg
Tek_z_schem.png|Main Amplifier
Tek z 2.jpg
Tek z 3.jpg
Tek z 4.jpg
Tek z 5.jpg
Tek z 6.jpg
Tek z 7.jpg
</gallery>
</gallery>
==Components==
{{Parts|Z}}


[[Category:500 series plugins]]
[[Category:500 series plugins]]
[[Category:Differential amplifiers]]
[[Category:Differential amplifiers]]

Latest revision as of 08:24, 6 December 2023

Tektronix Type Z
Comparator preamp plug-in
Type Z front view

Compatible with 500-series scopes

Produced from 1960 to 1969

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix Type Z is a comparator plug-in for 500-series scopes, introduced in 1960 and dropped after 1968. It was designed by Charlie Rhodes and Ron Olson.

The Type Z has two inputs, A and B, plus a precision comparison voltage, VC, that is adjustable from 0 to ±1 V, 10 V, or 100 V via a ten-turn pot.

The following differential amplifier can be configured to display VA, −VB, VA−VB, VA−VC, or VC−VB.

This allows DC-coupled measurements of small signals with large DC offsets.

Unlike later comparators, Type Z has separate step attenuators for each input, permitting the user to view the difference between signals of widely differing amplitudes. Unfortunately the divider resistors have no trim, so CMRR is poor except at 50mV/div.

It is also the only comparator that can handle ±100 V common mode at full sensitivity.

With a pair of "Disconnect Signal" buttons, the Type Z was the first movement toward a "GND" position on the input switches.

The Type P6023 probe with R and C compensation, introduced in 1962, was specifically designed for the Type Z but also marketed for the Type G.

Specifications

Maximum sensitivity is 50 mV/div, and common-mode rejection is 40,000:1 "from DC through audio frequencies".

Risetime as a general-purpose amplifier is 27 ns (13 MHz bandwidth). A side effect of Type Z's unprecedented dynamic range is that transient response is a function of signal amplitude: slew rates faster than 1V in 6ns will cause distortion due to grid current.

Internals

The Type Z uses both tubes and transistors, capitalizing on the strengths of each.

The step attenuators are turret attenuators.

Prices

  • $525 in 1962 (~$5,300 in 2023 dollars)

Links

Pictures

Schematics

Components

Some Parts Used in the Z

Part Part Number(s) Class Description Used in
0G3 154-0291-00 Gas Discharge Tube (Voltage regulator) 85 V voltage reference 132 506 547 560 561 561A 561S 564 565 567 661 TU-4 Z
12AT7 154-0039-00 Vacuum Tube (Dual Triode) dual high-gain triode 161 180 310 310A 315 316 360 502 502A 511A 512 513 513D 514 514AD 514D 516 524 529 RM529 544 546 547 556 565 570 3A2 75 3A75 1M1 A B C G H K L ML M N K R S Z
12AU6 154-0040-00 Vacuum Tube (Pentode) RF pentode 81 112 1L10 1L20 1L60 3L10 512 556 575 545 547 549 581 585 A B C G K H L ML M N O R S Z
6AK5 154-0014-00 154-0206-00 154-0084-00 Vacuum Tube (Pentode) RF pentode B C CA G K L ML S Z 517 517A 524
6DJ8 154-0187-00 154-0305-00 Vacuum Tube (Dual Triode) dual triode 132 161 310A 316 317 502 502A 503 504 506 515 516 519 526 529 RM529 533 535 536 543 544 545 545A 545B 546 547 549 555 556 561A 561S 564 565 567 581 581A 585 585A 661 1A4 1S1 60 2A60 63 2A63 67 2B67 3A1 3A1S 3A2 3A3 3A6 3A7 72 3A72 75 3A75 4S2 51 3B1 3B1S 3B2 3B3 3B4 3M1 3S76 3T77 3T77A 9A1 9A2 1121 80 81 82 86 B O W Z Telequipment D56 Telequipment S32A Telequipment D52 S-311 Telequipment TD51 Telequipment S52 Telequipment S51 Telequipment Type A TU-4
RT5204 151-0058-00 Discrete component Silicon NPN transistor 565 RM565 Z 2A61 3B1 3B3 3S76 3T77