33,162
edits
11401: Difference between revisions
→Vertical Signal Path
| Line 48: | Line 48: | ||
packaged as part number [[155-0320-00]] or 155-0320-01, depending on the mainframe's serial number. | packaged as part number [[155-0320-00]] or 155-0320-01, depending on the mainframe's serial number. | ||
U1040 has three sampling strobe outputs, which are fed to the sampling gates. | U1040 has three sampling strobe outputs, which are fed to the sampling gates. | ||
The plug-in connector's differential "DISPLAY" pins are connected to the samplers by coaxial cable, i.e., there are no | |||
no high-speed amplifiers in the mainframe's signal path. | |||
The DISPLAY+ and DISPLAY- signals are fed to separate samplers. | |||
The sampled signals are combined in the channel switch to obtain a single-ended signal that is fed to the ADC. | |||
The outputs of the sampling gates are multiplexed by a channel switch into an ADC. | The outputs of the sampling gates are multiplexed by a channel switch into an ADC. | ||