FG501: Difference between revisions

Revision as of 16:33, 22 September 2018

Tektronix FG501
function generator Tektronix FG501 Produced from 1972 to 1993 Manuals Tektronix FG501 Manual (PDF) Tektronix FG501A Manual (OCR, PDF) (All manuals in PDF format unless noted otherwise)

The Tektronix FG501 is a function generator plug-in for the TM500 system.

The TRIG OUT signal is available on the front panel via a BSM female connector.

	— FG501 —
Frequency	0.01 Hz to 1 MHz in decade steps
Output	Max. 20 V_p-p into high impedance, 10 V into 50 Ω (SN < B130000: 15/7.5 V)
Offset	Max. ±7.5 V_p-p into high impedance, 5 V into 50 Ω (SN < B130000: 5/2.5 V
	— FG501A —
Frequency	0.002 Hz to 2 MHz in eight decade steps
Output	Max. 30 V_p-p (into high impedance)
Attenuator	60 dB in 20 dB steps, 20 dB variable
Rise time	25 ns
	— All models —
Signals	sine, square, triangle, ramp, pulse
Features	voltage controlled frequency input (1000:1 ratio) triggering variable phase control symmetry variable from 5—95% internal sweep generator, 3 decades, lin/log

@@ Line 39: / Line 39: @@
 File:Tek fg501a 3.jpg|FG501A
 File:Tek fg501a 4.jpg|FG501A
+Tek fg 501a front.jpg|FG501A
+Tek fg 501a left.jpg|FG501A
+Tek fg 501a right.jpg|FG501A
+Tek fg 501a rear.jpg|FG501A
 </gallery>