299
edits
D: Difference between revisions
Specs and circuitry
Vintage dave (talk | contribs) (D was replaced by 1A7 not W) |
Vintage dave (talk | contribs) (Specs and circuitry) |
||
| Line 38: | Line 38: | ||
==Internals== | ==Internals== | ||
Instruments below serial number 3462 used a pair of [[5814]] tubes at the input; later production used [[12AU7]]'s. | |||
These two tube types have different heater currents, and because the heaters are | These two tube types have different heater currents, and because the heaters are | ||
series-wired, you cannot switch from one type to the other without circuit modification. | series-wired, you cannot switch from one type to the other without circuit modification. | ||
== | {{BeginSpecs}} | ||
{{Spec | Deflection | 1 mV/Div to 50 V/Div in 1–2–5-10-20-50 sequence and 1-10-100-1000 sequence }} | |||
{{Spec | Input impedance | 1 MΩ // 47 pF (either input) }} | |||
{{Spec | Bandwidth | 2 MHz with MV/CM MULTIPLIER set to 50; 300kHz with MV/CM MULTIPLIER set to 1 }} | |||
{{Spec | CMRR | 10000:1 with MILLIVOLTS/CM set to 1, 1000:1 otherwise }} | |||
{{Spec | Signal ranges | }} | |||
{| class="wikitable" border=1 style="margin-left: 8em;" | | |||
!Range | |||
! Common mode dynamic range* | |||
|- | |||
| MILLIVOLTS/CM = 1 || ±2.5 V | |||
|- | |||
| MILLIVOLTS/CM = 10 || ±25 V | |||
|- | |||
| MILLIVOLTS/CM = 100 || ±250 V | |||
|- | |||
| MILLIVOLTS/CM = 1000 || ±500 V | |||
|- | |||
|} | |||
* In practice, Type D behaves well up to about +/-15V if the CM signal is either a brief excursion or a constant. If the CM varies slowly, DC shift in the input tubes will degrade CMRR. | |||
{{EndSpecs}} | |||
==Pictures== | ==Pictures== | ||