P510: Difference between revisions
Jump to navigation
Jump to search
(Created page with "The Tektronix P510A is a 10x passive voltage probe. Maximum voltage is 600 V peak-to-peak. It connects to the scope with a UHF connector. * [http://w140.com/tek_p510a.pdf...") |
No edit summary |
||
| (9 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
The Tektronix P510A is a 10x passive voltage probe | {{Probe Sidebar | ||
|manufacturer=Tektronix | |||
|model=P510 | |||
|summary=10× passive probe | |||
|image=Tek_p510a.jpg | |||
|caption=Tek P510A | |||
|for=1 MΩ scope inputs | |||
|introduced=1955 | |||
|discontinued=(?) | |||
|manuals= | |||
* [[Media:Tek_p510a.pdf|Tektronix P510A Schematic and Description]] | |||
}} | |||
The '''Tektronix P510A''' is a 10x passive voltage probe that was made for slower Tek scopes, up to the [[535|Type 535]]. | |||
The P510 uses a standard 50 Ω coax cable, which rings above 10 MHz. This aberration is not visible on slower displays, but the 30 MHz [[545|Type 545]] necessitated a new probe, the [[P410|P400 Series]]. | |||
[[Category: | {{BeginSpecs}} | ||
{{Spec | Attenuation | ×10 }} | |||
{{Spec | Input impedance | 10 MΩ // 12 pF (with 40 pF scope input) }} | |||
{{Spec | Input voltage | max. 600 V<sub>p-p</sub> }} | |||
{{Spec | Scope connection | [[UHF connector]] to 1 MΩ // 40 pF scope input }} | |||
{{EndSpecs}} | |||
==Pictures== | |||
<gallery> | |||
Tek_p510a_schem.png | |||
Tek p510a 1.jpeg | |||
Tek p510a 2.jpeg | |||
Tek p510a 3.jpeg | |||
Tek p510a 4.jpeg | |||
Tek p510a 5.jpeg | |||
Tek p510a 6.jpeg | |||
</gallery> | |||
[[Category:1 MΩ Oscilloscope probes]] | |||
Latest revision as of 09:54, 7 February 2023
The Tektronix P510A is a 10x passive voltage probe that was made for slower Tek scopes, up to the Type 535.
The P510 uses a standard 50 Ω coax cable, which rings above 10 MHz. This aberration is not visible on slower displays, but the 30 MHz Type 545 necessitated a new probe, the P400 Series.
Key Specifications
| Attenuation | ×10 |
|---|---|
| Input impedance | 10 MΩ // 12 pF (with 40 pF scope input) |
| Input voltage | max. 600 Vp-p |
| Scope connection | UHF connector to 1 MΩ // 40 pF scope input |
