1,342
edits
(Add description) Tag: Removed redirect |
mNo edit summary |
||
(10 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
'''Power Supplies for the Tektronix Type 134 Current Probe Amplifier''' | |||
Tektronix | The '''Tektronix 015-0058-00''' is the early 115 V<sub>AC</sub> power supply version for the Tektronix [[134]]. It has a standard NEMA 5-15 AC power plug built onto the body of the power supply. | ||
The '''Tektronix 015-0059-00''' is the early 230 V<sub>AC</sub> power supply version for the Tektronix [[134]]. It is identical to the 115 V<sub>AC</sub> version except for the cover, which has a different part number and voltage rating printed on it, and the addition of dropping resistors (2 kΩ & 2.7 kΩ, both 3 W) in series with the transformer primary. Oddly, this 230 V<sub>AC</sub> version appears to use a NEMA 5-15 115 V<sub>AC</sub> cord and plug. The addition of the two series resistors allows it to work from 207 to 253 V<sub>AC</sub>. | |||
The | The '''Tektronix 015-0058-01''' is the later 115 V<sub>AC</sub> version of the power supply for the Tektronix [[134]] Current Probe Amplifier. It differs from the 015-0058-00 in that it has a ~1 m AC power cord, an extended section of the housing to accommodate the power cord and strain relief, and a different part number on the plastic housing. | ||
The '''Tektronix 015-0059-01''' is the later 230 V<sub>AC</sub> version of this power supply. It differs from the 015-0059-00 in that it has a ~1 m AC power cord, an extended section of the housing to accommodate the power cord and strain relief, and a different part number on the plastic housing. | |||
The '''Tektronix 013-0050-00''' battery adaptor, allows the Type [[134]] to be powered from any 22.5 V battery capable of delivering 70 mA. Note that, due to the complete absence of ground connections, this accessory could also be used for the Type [[131]]. | |||
The latest version ''(please add)'' of the Type [[134]] power supply appears to be a Tektronix branded wall wart with an AC line cord and output to an inline connector. | |||
Each version provides an unfiltered full wave rectified 20-25 V<sub>DC</sub> output to the [[134]] amplifier. The negative side is held near ground by a pair of anti-parallel diodes and the center conductor of the output connector is positive. That output is filtered and regulated down to ~14 V in the amplifier. They work from 50 to 400 Hz and 103.5 to 126.5 V<sub>AC</sub>, or 201 to 253 V<sub>AC</sub> for the 230 V versions. The output is via a proprietary coaxial Tektronix connector. | |||
The early versions resemble the '''Tektronix [[131]]''' [[015-027 | power supplies ]], with the built-in AC power plug, and all the output connectors are the same, but the [[015-027 | 131 power supplies ]] and [[134]] power supplies are not interchangeable, due to the difference in grounding. | |||
==Pictures== | |||
<gallery> | |||
015-0058-01 plug L.JPG | Early Style, Left Side w/integral plug, assembled from parts, note wrong part number | |||
015-0058-01 plug R.JPG | Early Style, Right Side w/integral plug | |||
015-0058-01 corded.JPG | Late Power Supply w/cord and plug. Note broken output connector | |||
015-0058-01 output.JPG | Intact Output Connector | |||
015-0058-01.later.jpg | later version, thinner cord, sleeve w/conductor labels | |||
134 latest.jpg | latest version with wall wart PS | |||
</gallery> | |||
[[Category:Accessory power supplies]] | [[Category:Accessory power supplies]] |
edits