067-0625-00: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (10 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
The Tektronix 067-0625-00 is a | {{Instrument Sidebar | ||
The input amplitude should be 1. | |manufacturer=Tektronix | ||
The input is a [[ | |class=Accessory | ||
|model=067-0625-00 | |||
|summary=Peak-to-Peak Detector | |||
|image=Tek 0625 1.JPG | |||
|caption=Tektronix 067-0625-00 | |||
|introduced=(?) | |||
|discontinued=(?) | |||
|manuals= | |||
* [[Media:062-1306-00.pdf|Tektronix 067-0625-00 Manual -00]] (PDF) | |||
* [[Media:062-1306-01.pdf|Tektronix 067-0625-00 Manual -01]] (PDF) | |||
* [[Media:Tek 067-0625-00 service cal procedure.pdf|Tektronix 067-0625 Service Calibration Procedure (OCR)]] | |||
}} | |||
The '''Tektronix 067-0625-00''' is a peak-to-peak detector designed to measure the output voltage flatness | |||
of constant amplitude signal generators in the 50 Hz to 500 MHz range. | |||
The input amplitude should be 1.2 V<sub>p-p</sub>. | |||
The input is a [[GR-874 connector]] terminated in 50 Ω. | |||
There are two outputs, one for the positive peak voltage and one for the negative peak voltage. | There are two outputs, one for the positive peak voltage and one for the negative peak voltage. | ||
The outputs are [[ | The outputs are [[BNC]] females, intended for connection to high-impedance low-frequency | ||
instrumentation. | instrumentation. | ||
Up to serial number B003240, the 067-0625-00 used 1. | Up to serial number B003240, the 067-0625-00 used 1.35 V mercury batteries for biasing the detector diodes. | ||
Starting at serial number B003241, 1. | Starting at serial number B003241, 1.5 V alkaline batteries were used. | ||
{{BeginSpecs}} | |||
{{Spec | Sensitivity | 10 ±1 mV/% input change at 1.2 V<sub>p-p</sub> }} | |||
{{Spec | Temperature Range | 23°C ±10°C }} | |||
{{Spec | Output | Into floating 2 MΩ load or differential oscilloscope with 1 MΩ inputs }} | |||
{{EndSpecs}} | |||
* [ | ==Links== | ||
* [https://www.youtube.com/watch?v=VVPHifwseJc Building a 067-0625-00 clone] by NFM @ YouTube | |||
==Pictures== | |||
<gallery> | <gallery> | ||
Tek 0625 1.JPG | |||
Tek 0625 2.JPG | |||
Tek 067-0625-00 schem.png | |||
</gallery> | </gallery> | ||
[[Category:Test adapters]] | |||
Latest revision as of 04:30, 11 March 2024
The Tektronix 067-0625-00 is a peak-to-peak detector designed to measure the output voltage flatness of constant amplitude signal generators in the 50 Hz to 500 MHz range. The input amplitude should be 1.2 Vp-p.
The input is a GR-874 connector terminated in 50 Ω.
There are two outputs, one for the positive peak voltage and one for the negative peak voltage. The outputs are BNC females, intended for connection to high-impedance low-frequency instrumentation.
Up to serial number B003240, the 067-0625-00 used 1.35 V mercury batteries for biasing the detector diodes. Starting at serial number B003241, 1.5 V alkaline batteries were used.
Key Specifications
| Sensitivity | 10 ±1 mV/% input change at 1.2 Vp-p |
|---|---|
| Temperature Range | 23°C ±10°C |
| Output | Into floating 2 MΩ load or differential oscilloscope with 1 MΩ inputs |
Links
- Building a 067-0625-00 clone by NFM @ YouTube
