AWG510: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(New page: * [http://w140.com/tek_awg510_520.pdf Tektronix AWG510/AWG520 Manual (PDF)])
 
No edit summary
 
(14 intermediate revisions by 4 users not shown)
Line 1: Line 1:
* [http://w140.com/tek_awg510_520.pdf Tektronix AWG510/AWG520 Manual (PDF)]
{{Instrument Sidebar
|manufacturer=Tektronix
|model=AWG510
|class=Signal generator
|series=
|summary=arbitrary waveform generator
|image=AWG510_Front.jpg
|caption=Tektronix AWG510
|introduced=(?)
|discontinued=(?)
|designers=
|manuals=
* [[Media:071-0099-51.pdf|AWG510/AWG520 User Manual 071-0099-51]]
* [[Media:071-0101-50.pdf|AWG510/AWG520 Service Manual 071-0101-50]]
* [[Media:075-0263-50.pdf|AWG510/AWG520 Rackmount Kit Manual 075-0263-50]]
* [[Media:071-0100-00.pdf|AWG500/600/700 Programmer Manual 071-0100-00]]
* [[Media:070-A810-50.pdf|AWG500/600/700 Programmer Manual 070-A810-50]]
}}
The '''Tektronix AWG510''' is an arbitrary waveform generator.
 
{{BeginSpecs}}
{{Spec | Sampling Frequency    | 50 MHz to 1 GHz, 8 digits resolution, ±1 ppm within 1 year (25 °C) }}
{{Spec | Waveform memory        | 4,194,048 10-bit words}}
{{Spec | Marker memory          | 4,194,048 words (2 markers x 1 bit) }}
{{Spec | Sequence memory        | Maximum 8000 steps }}
{{Spec | Sequence counter      | 1 to 65536, or infinite }}
{{Spec | Waveform data points  | 256 – 4,194,048 points (multiple of 4) }}
{{Spec | D/A resolution        | 10 bits}}
{{Spec | Phase noise, typical  | @ 1 GHz: –80 dBc/Hz (10 kHz offset), –100 dBc/Hz (100 kHz offset) }}
{{Spec | Output Impedance      | 50 Ω }}
{{Spec | Amplitude range        | 20 mV<sub>p-p</sub> to 2 V<sub>p-p</sub>, 1 mV resolution,  Offset –2 V to +2 V, into a 50 Ω load}}
{{Spec | Rise/fall time        | ≤ 2.5 ns (amplitude > 1.0 V p-p), ≤ 1.7 ns (amplitude ≤ 1.0 V p-p) (10% to 90%) }}
{{Spec | Power                  | 90–250 V<sub>AC</sub>, 48–63 Hz, 400 W (standard) }}
{{Spec | Dimensions            | 194 mm (7.64") x 434 mm (17.1") x 602 mm (23.71"), H×W×L }}
{{Spec | Net Weight            | 17 kg (37.5 lb) }}
{{EndSpecs}}
 
==Software==
* [[Media:Awgcnvt104.zip|AWG400/500/600/700 Conversion Utility - Converts ASCII and AWG2000 Series file formats.]] (ZIP)
* [[Media:ArbLink.zip|ARB-Link Waveform Creation Utility]] (ZIP)
* [[Media:MCIQ.ZIP|Multi-Carrier IQ Generator - MCIQ. Create digitally modulated signals and waveforms]] (ZIP)
* [[Media:WaveWriter4 01E.zip|Wavewriter software Win3.1, 95, 98, NT4]] (ZIP)
* [[Media:070-8401-04.pdf|Tektronix WaveWriter (AWE) User Manual]]
* [[Media:AWGandAFGLabVIEWExamples.zip|Labview Examples]] (ZIP)
 
==Standard Accessory Floppy Disks==
* [[Media:063-2981-00.zip|AWG500 Series Sample Waveforms Disk 063-2981-00]] (ZIP)
* [[Media:063-2982-00.zip|AWG500 Series GPIB Sample Program Disk 063-2982-00]] (ZIP)
* [[Media:063-2983-50.zip|AWG500 Performance Verification Disk 063-2983-50]] (ZIP)
 
==Firmware==
* [[Media:AW50P23.zip|AWG500 Series Program Upgrade v2.3]] (ZIP)
* [[Media:AW50P40.zip|AWG500 Series Program Upgrade v4.0]] (ZIP)
 
==Options==
* A1 - Universal European power cord
* A2 - UK power cord
* A3 - Australian power cord
* A4 - North American power cord
* A5 - Switzerland power cord
* 03 - Digital data out
* 1R - Rackmount
* 1S - WaveWriter S3FTx00 Software
* 10 - 78 MByte Flash Disk (replaces Hard disk)
* D1 - Certificate with Calibration Data
 
* MOD MD1 - Move output jacks to rear panel
 
==Optional Accessories==
* 071-0101-XX - Service Manual
* 200-3696-01 - Front Cover
* 016-1675-XX - Rack Mount Kit (for field conversion)
* 012-0991-00 - GPIB cable
* 012-1342-00 - BNC cable, 50 Ω
* 012-1256-00 - BNC cable, 50 Ω, double-shield
* 012-1458-00 - SMB cable, 50 Ω
* 012-1459-00 - SMB-to-BNC cable, 50 Ω
* 011-0049-02 = BNC terminator, 50 Ω
* 015-0660-00 - BNC power divider, 50 Ω, DC to 300 MHz, VSWR: 1.2 max.
* 015-0659-00 - BNC low pass filter, 400 MHz
* 015-0658-00 - BNC low pass filter, 200 MHz
* 015-0657-00 - BNC low pass filter, 100 MHz
 
==Standard Accessories==
* 071-0099-51 - User Manual
* 070-A810-50 - Programmer Manual
* 063-2981-XX - Sample waveform floppy disk, 3.5 inch
* 063-2982-XX - GPIB sample program floppy disk, 3.5 inch
* 063-2983-XX - Performance check/adjustment floppy disk 3.5 inch
* 063-3763-XX - Arb-Express Software Package
* 061-4288-XX - Arb-Express Software Package, Instructions
* 159-0407-00 - Fuse, 10 A FAST (UL198G, 3AG) (installed to the instrument)
* 200-2264-00 - Fuse cap (installed to the instrument)
* 161-0232-01 - U.S. Power Cord
 
==Links==
* EEVBlog Forum Threads:
** [https://www.eevblog.com/forum/repair/sonytektronix-awg520-2ch-1gss-with-no-output-repair-attempt-and-teardown/msg4121044/#msg4121044 Replacing disk drives with CF cards and updating operating system]
 
==Pictures==
<gallery>
AWG510_Front.jpg
AWG510_Left.jpg
AWG510_Rear.jpg
AWG510_Right.jpg
AWG510_MOD_MD1_Front.jpg|Mod MD1 Front
AWG510_MOD_MD1_Rear.jpg|Mod MD1 + Opt 03 Rear
 
</gallery>
 
[[Category:Arbitrary waveform generators]]

Latest revision as of 05:15, 9 June 2024

Tektronix AWG510
arbitrary waveform generator
Tektronix AWG510

Produced from (?) to (?)

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix AWG510 is an arbitrary waveform generator.

Key Specifications

Sampling Frequency 50 MHz to 1 GHz, 8 digits resolution, ±1 ppm within 1 year (25 °C)
Waveform memory 4,194,048 10-bit words
Marker memory 4,194,048 words (2 markers x 1 bit)
Sequence memory Maximum 8000 steps
Sequence counter 1 to 65536, or infinite
Waveform data points 256 – 4,194,048 points (multiple of 4)
D/A resolution 10 bits
Phase noise, typical @ 1 GHz: –80 dBc/Hz (10 kHz offset), –100 dBc/Hz (100 kHz offset)
Output Impedance 50 Ω
Amplitude range 20 mVp-p to 2 Vp-p, 1 mV resolution, Offset –2 V to +2 V, into a 50 Ω load
Rise/fall time ≤ 2.5 ns (amplitude > 1.0 V p-p), ≤ 1.7 ns (amplitude ≤ 1.0 V p-p) (10% to 90%)
Power 90–250 VAC, 48–63 Hz, 400 W (standard)
Dimensions 194 mm (7.64") x 434 mm (17.1") x 602 mm (23.71"), H×W×L
Net Weight 17 kg (37.5 lb)

Software

Standard Accessory Floppy Disks

Firmware

Options

  • A1 - Universal European power cord
  • A2 - UK power cord
  • A3 - Australian power cord
  • A4 - North American power cord
  • A5 - Switzerland power cord
  • 03 - Digital data out
  • 1R - Rackmount
  • 1S - WaveWriter S3FTx00 Software
  • 10 - 78 MByte Flash Disk (replaces Hard disk)
  • D1 - Certificate with Calibration Data
  • MOD MD1 - Move output jacks to rear panel

Optional Accessories

  • 071-0101-XX - Service Manual
  • 200-3696-01 - Front Cover
  • 016-1675-XX - Rack Mount Kit (for field conversion)
  • 012-0991-00 - GPIB cable
  • 012-1342-00 - BNC cable, 50 Ω
  • 012-1256-00 - BNC cable, 50 Ω, double-shield
  • 012-1458-00 - SMB cable, 50 Ω
  • 012-1459-00 - SMB-to-BNC cable, 50 Ω
  • 011-0049-02 = BNC terminator, 50 Ω
  • 015-0660-00 - BNC power divider, 50 Ω, DC to 300 MHz, VSWR: 1.2 max.
  • 015-0659-00 - BNC low pass filter, 400 MHz
  • 015-0658-00 - BNC low pass filter, 200 MHz
  • 015-0657-00 - BNC low pass filter, 100 MHz

Standard Accessories

  • 071-0099-51 - User Manual
  • 070-A810-50 - Programmer Manual
  • 063-2981-XX - Sample waveform floppy disk, 3.5 inch
  • 063-2982-XX - GPIB sample program floppy disk, 3.5 inch
  • 063-2983-XX - Performance check/adjustment floppy disk 3.5 inch
  • 063-3763-XX - Arb-Express Software Package
  • 061-4288-XX - Arb-Express Software Package, Instructions
  • 159-0407-00 - Fuse, 10 A FAST (UL198G, 3AG) (installed to the instrument)
  • 200-2264-00 - Fuse cap (installed to the instrument)
  • 161-0232-01 - U.S. Power Cord

Links

Pictures

  • Mod MD1 Front

    Mod MD1 Front

  • Mod MD1 + Opt 03 Rear

    Mod MD1 + Opt 03 Rear

Retrieved from "https://w140.com/tekwiki/index.php?title=AWG510&oldid=94038"