WP1000AF: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(Minor corrections)
(Minor correction / Backup of external link added)
 
(9 intermediate revisions by 2 users not shown)
Line 11: Line 11:
|designers=
|designers=
|manuals=
|manuals=
* [[Media:Tek 7b71 mod 515c.pdf | Tektronix Mod 515C supplement]]
* [[Media:Tek 7b71 mod 515c.pdf | Tektronix 7B71 Mod 515C supplement]]
* [[Media:061-1742-00.pdf|Tektronix 7A16A Mod 515D Manual]]
* [[Media:061-1742-00.pdf | Tektronix 7A16A Mod 515D Manual]]
}}
}}
The '''Tektronix WP1000AF''' [[DPO|Digial Processing Oscilloscope System]] is a bundle of a DPO, two [[7A16A]] and two [[7B71]] plugins. All components have additional modifications, which allows an external computer to control some of the settings. The National Stock Number ([[NSN]]) for this bundle was 6625-01-034-4833.  
The '''Tektronix WP1000AF''' [[SPS|Signal Processing System]] is a bundle of a [[P7001|DPO]], two [[7A16A]] vertical plugins and two [[7B71]] horizontal plugins. All components have additional modifications (Mod 515C or -D), which allow an external computer to control some of the front panel settings. The National Stock Number ([[NSN]]) for this bundle is 6625-01-034-4833.  


===Details of the configuration===
====Parts of the WP1000AF bundle====
{| class="wikitable"
{| class="wikitable"
|-
|-
! Count
! Count
! NSN Number
! NSN Number
! Tek Name
! Tek Name/Parts
! Description
! Description
|-
|-
| 1
| 1
| 7021-01-038-5028
| 7021-01-038-5028
| P7001 + D7704 + A7704 MOD515C
| P7001 + D7704 + A7704 Mod 515C
|  
|  
|-
|-
| 2
| 2
| 6625-01-037-0091
| 6625-01-037-0091
| 7A16A MOD515D
| 7A16A Mod 515D
|  
|  
|-
|-
| 2
| 2
|
|
| 7B71 MOD515C
| 7B71 Mod 515C
|  
|  
|-
|-
| 1
| 1
|  
|  
| 33-A1-13-484-1
|  
| Documentation
| Documentation
|-
|-
Line 47: Line 47:
| 5305-01-076-3151
| 5305-01-076-3151
| 213-0054-00
| 213-0054-00
| Screw
| Screw, 6-32, 5/16, Pan-Head
|}
|}


===Pictures===
===Mainframe===


====Mainframe====
The 7704A Mod 515C adds the ability to remotely operate the vertical, horizontal and triggering modes of the mainframe. Additional connectors on the rear are directly connected to the plugin-compartments to allow remote operations for the plugins.
 
====Pinout of the remote connector for the Mainframe====
 
{| class="wikitable"
|-
! Pin
! Function
! Data Type
! Range
! Description
|-
| Coax #1
| n.C.
|
|
|
|-
| Coax #2
| n.C.
|
|
|
|-
| Coax #3
| n.C.
|
|
|
|-
| 5 Single Pins
| Device Code
| colspan="3" style="text-align:center;"| See Table below
|-
| Coax #4
| Remote Control
| 8-Bit serial
| TTL-Compatible
| Bit 8+7+6: Vert mode<br> Bit 6+5: B Trigger<br> Bit 4+3: A trigger<br> Bit 2+1: Horz mode<br>Info: Bit 6 is shared
|-
|}


<gallery>
<gallery>
Tek_wp1000af_front_01.jpg|Front view of the system. The Mainframe and the plugins have remote/local switches
Tek_wp1000af_front_01.jpg | Front view of the system. The Mainframe and the plugins have remote/local switches
Tek_wp1000af_mod515c_label.jpeg|Tag indicating the modification
Tek_wp1000af_mod515c_label.jpeg | Tag indicating the modification
Tek_wp1000af_remote_local.jpeg|remote/local switch
Tek_wp1000af_remote_local.jpeg | Remote/local switch on the lower section of the DPO
Tek_wp1000af_honeywell_tag.jpeg|Tag added by Honeywell - indicates the later usage of this mainframe
Tek_wp1000af_rear_01.jpg | Rear view of the system
Tek_wp1000af_rear_connectors.jpeg|The additional connectors for remote control  
Tek_wp1000af_honeywell_tag.jpeg | Tag added by Honeywell - indicates the later usage of this specific mainframe
Tek_wp1000af_remote_rear.jpg|The additional connectors for remote control (rear view)
Tek_wp1000af_rear_connectors.jpeg | The additional connectors for remote control  
Tek_wp1000af_replacement_connectors.jpg|Replacements for the remote control connectors are still available in 2024
Tek_wp1000af_remote_rear.jpg | The additional connectors for remote control (rear view)
Tek_wp1000af_powersuppply.jpeg|The MOD515C needs a permanent 5V. The switch for turning off the lights was removed
Tek_wp1000af_replacement_connectors.jpg | Replacements for the remote control connectors are still available in 2024
Tek_wp1000af_brd_pwrsupply.jpg|Additional connector board on the power supply
Tek_wp1000af_powersuppply.jpeg | The switch to turn off the control illumination was removed.The Mod 515C needs a permanent 5V supply.
Tek_wp1000af_allboards_mainframe.jpg|Most boards of the MOD515C modification
Tek_wp1000af_brd_pwrsupply.jpg | Additional connector board on the power supply
Tek_wp1000af_boards.jpeg|Overview on the additional boards in the lower section of the mainframe
Tek_wp1000af_allboards_mainframe.jpg | Most boards of the Mod 515C modification
Tek_wp1000af_mode_switches.jpg|The replaced mode switches.  
Tek_wp1000af_boards.jpeg | Overview on the additional boards in the lower section of the mainframe
Tek_wp1000af_horzmode_top.jpg|Horizontal mode switch assembly. The lights work independently from the switches.
Tek_wp1000af_mode_switches.jpg | The modified mode switches.  
Tek_wp1000af_horzmode_bottom.jpg|Horizontal mode switch assembly. The lights work independently from the switches.
Tek_wp1000af_horzmode_top.jpg | Mod 515C horizontal mode switch assembly. The lights work independently from the switches.
Tek_wp1000af_vertmode_top.jpg|Horizontal mode switch assembly. The lights work independently from the switches.
Tek_wp1000af_horzmode_bottom.jpg | Mod 515C horizontal mode switch assembly. The lights work independently from the switches.
Tek_wp1000af_vertmode_bottom.jpg|Horizontal mode switch assembly. The lights work independently from the switches.
Tek_wp1000af_vertmode_top.jpg | Mod 515C vertical mode switch assembly. The lights work independently from the switches.
Tek_wp1000af_switch_logic.jpeg|The main logic board of the MOD515C
Tek_wp1000af_vertmode_bottom.jpg | Mod 515C vertical mode switch assembly. The lights work independently from the switches.
Tek_wp1000af_mainlogic_top.jpeg|The main logic board of the MOD515C
Tek_wp1000af_switch_logic.jpeg | The main logic board of the Mod 515C
Tek_wp1000af_mainlogic_bottom.jpeg|The main logic board of the MOD515C
Tek_wp1000af_mainlogic_top.jpeg | The main logic board of the Mod 515C
Tek_wp1000af_serial_board.jpeg|The serial receiver board
Tek_wp1000af_mainlogic_bottom.jpeg | The main logic board of the Mod 515C
Tek_wp1000af_serial_top.jpg|The serial receiver board
Tek_wp1000af_serial_board.jpeg | The serial receiver board
Tek_wp1000af_serial_bottom.jpg|The serial receiver board
Tek_wp1000af_serial_top.jpg | The serial receiver board
Tek_wp1000af_calibrator.jpg|The modified calibrator board
Tek_wp1000af_serial_bottom.jpg | The serial receiver board
Tek_wp1000af_maininterface_01.jpg|Additional coax connectors of the plugin interfaces
Tek_wp1000af_calibrator.jpg | The Mod 515C calibrator board  
Tek_wp1000af_maininterface_02.jpg|Additional coax connectors of the plugin interfaces
Tek_wp1000af_maininterface_01.jpg | Additional coax connectors of the plugin interfaces
Tek_wp1000af_maininterface_02.jpg | Additional coax connectors of the plugin interfaces
</gallery>
</gallery>


====P7001====
===P7001===


The only modification the P7001 was on the z-axis/front panel pcb. The switch allowed a longer timeout for the external computer.
The only modification to the P7001 was done on the z-axis/front panel pcb. A switch allowed to change to a longer timeout period for the external computer.


<gallery>
<gallery>
Tek_wp1000af_p7001_frontpanel01.jpg|Z-Axis/Frontpanel pcb with additional switch and timing resistors
Tek_wp1000af_p7001_frontpanel01.jpg | Z-Axis/Frontpanel pcb with additional switch and timing resistor
Tek_wp1000af_p7001_frontpanel02.jpg|Z-Axis/Frontpanel pcb with additional switch and timing resistors
Tek_wp1000af_p7001_frontpanel02.jpg | Z-Axis/Frontpanel pcb with additional switch and timing resistor
</gallery>
</gallery>


====7A16A MOD515D Plugin====
===7A16A Mod 515D Plugin===
 
The 7A16A Mod 515D adds the ability to remotely operate the Bandwith, Polarity and Position functions of the plugin.
 
====Pinout of the remote connectors for the vertical plugins====
 
{| class="wikitable"
|-
! Pin
! Function
! Input Type
! Range
! Description
|-
| Coax #1
| Polarity
| Digital
| 0 or 5V, TTL compatible
| +5V => +Up<br> 0V => invert<br> open => +Up
|-
| Coax #2
| Bandwith
| Digital
| 0 or 5V, TTL compatible
| +5V => Full<br> 0V => 20MHz<br> open => Full
|-
| Coax #3
| Position
| Analog
| 0...5V
| +5V => max upward<br> 0V => max downward<br> open => center
|-
| 5 Single Pins
| Device Code
| colspan="3" style="text-align:center;"| See Table below
|-
| Coax #4
| n.C.
|
|
|
|-
|}


<gallery>
<gallery>
Tek_7a16a_mod515d_front.jpg|Front view of a 7A16A plugin with MOD515D
Tek_7a16a_mod515d_front.jpg | Front view of a 7A16A plugin with Mod 515D
Tek_7a16a_mod515d_left.jpg|Left side
Tek_7a16a_mod515d_left.jpg | Left side
Tek_7a16a_mod515d_right.jpg|Right side
Tek_7a16a_mod515d_right.jpg | Right side
Tek_7a16a_mod515d_top.jpg|Top side
Tek_7a16a_mod515d_top.jpg | Top side
Tek_7a16a_mod515d_serial.jpg|Closeup of serial number and MOD515D sticker
Tek_7a16a_mod515d_serial.jpg | Closeup of serial number and Mod 515D sticker
</gallery>
</gallery>


====7B71 MOD515C Plugin====
===7B71 Mod 515C Plugin===
 
The 7B71 Mod 515C adds the ability to remotely operate the triggering level, the position & delay time, the magnifier setting and the trigger-modes.
The modified 7B71 timebase can be configured as a delaying or as a delayed timebase.


The 7B71 timebase with MOD515C can be configured as a delaying or as a delayed timebase
====Pinout of the remote connectors for the horizontal plugins====
 
{| class="wikitable"
|-
! Pin
! Function
! Input Type
! Range
! Description
|-
| Coax #1
| Trigger Level
| Analog
| 0...5V
| +5V => max<br> 0V => min<br> open => center
|-
| Coax #2
| Delay Time Mult.
| Analog
| 0...5V
| +5V => max<br> 0V => min<br> open => center
|-
| Coax #3
| Position
| Analog
| 0...5V
| +5V => max<br> 0V => min<br> open => center
|-
| 5 Single Pins
| Device Code
| colspan="3" style="text-align:center;"| See Table below
|-
| Coax #4
| Trigger & Mag.
| 8-Bit serial
| TTL-Compatible
| Bit 8: Mag<br> Bit 7: Trig Slope<br> Bit 6+5: Trig Coupl.<br> Bit 4+3: Trig Mode<br> Bit 2+1: Trig Source
|-
|}


<gallery>
<gallery>
Tek_7B71_mod515c_front.jpg|Front view of a 7B71 plugin with MOD515C
Tek_7B71_mod515c_front.jpg | Front view of a 7B71 plugin with Mod 515C
Tek_7B71_mod515c_left.jpg|Left side
Tek_7B71_mod515c_left.jpg | Left side
Tek_7B71_mod515c_right.jpg|Right side
Tek_7B71_mod515c_right.jpg | Right side
Tek_7B71_mod515c_top.jpg|Top side
Tek_7B71_mod515c_top.jpg | Top side
Tek_7B71_mod515c_serial.jpg|Closeup of serial number and MOD515C sticker
Tek_7B71_mod515c_serial.jpg | Closeup of serial number and Mod 515C sticker
</gallery>
</gallery>


===Device Code Matrix on the 5 rear Remote Connectors===
The single contacts of each connector are grounded in different patterns to provide electrical identification to the computer.
{| class="wikitable" style="text-align: center;
|-
! Connector
! Single Pin #1
! Single Pin #2
! Single Pin #3
! Single Pin #4
! Single Pin #5
|-
! style="text-align:left;"|Left vertical plugin
| Open (n.C.)
| GND
| GND
| GND
| GND
|-
! style="text-align:left;"|Right vertical plugin
| GND
| Open (n.C.)
| GND
| GND
| GND
|-
! style="text-align:left;"|A horizontal plugin
| GND
| GND
| Open (n.C.)
| GND
| GND
|-
! style="text-align:left;"|B horizontal plugin
| GND
| GND
| GND
| Open (n.C.)
| GND
|-
! style="text-align:left;"|Mainframe
| GND
| GND
| GND
| GND
| Open (n.C.)
|}
===Field of Application===
Some details of the modification indicate that the WP1000AF system was developed either specifically for or in close consultation with Honeywell. Honeywell did some additional, but minor modifications to the system. The feet were modified so that the device could be fixed in place. They also added a cable tie holder and a tag to the back of the unit. The result got the Honeywell part-number 10066273-101 and the NSN number 6625-01-060-4390. The pictures on this page show such a device. Honeywell most likely used one of their own type of computer systems to control the DPO.


==Further modifications by Honeywell==
The contractors name and the contract number (see picture below) indicate that this specific instrument was involved in the development of the F15 aircraft project. And this external page: [https://www.gooding.org/mike/sweatt-award.html Michael J. Gooding, H. W. Sweatt Award] reveals that a WP1000AF system was used in the Test Environment (TITE) for the F15 Tactical Electronic Warfare System (TEWS).


Honeywell replaced the feet of the unit. They also added a cable tie holder and a tag to the back of the unit. The result got the Honeywell part-number 10066273-101 and the NSN number 6625-01-060-4390
====Parts of the Honeywell 10066273-101 bundle====


{| class="wikitable"
{| class="wikitable"
Line 127: Line 304:
| 5365-01-053-8742
| 5365-01-053-8742
| 10057922-101
| 10057922-101
| SPACER,PLATE
| Spacer, plate
| Honeywell
| Honeywell
|-
|-
| 5365-01-052-9612
| 5365-01-052-9612
| 10057922-102
| 10057922-102
| SPACER,PLATE
| Spacer, plate
| Honeywell
| Honeywell
|-
|-
Line 158: Line 335:
| 33A1-13-484-1
| 33A1-13-484-1
| Documentation
| Documentation
| Tektronix
| Ordnance Corps
|-
|-
|  
|  
Line 173: Line 350:


<gallery>
<gallery>
-Tek_wp1000af_feet_honeywell_01jpg.jpeg|Replaced foot
-Tek_wp1000af_feet_honeywell_01jpg.jpeg | Replaced foot
Tek_wp1000af_feet_honeywell_03.jpg|Replaced foot
Tek_wp1000af_feet_honeywell_03.jpg | Replaced foot
Tek_wp1000af_feet_honeywell_02jpg.jpeg|Replaced foot
Tek_wp1000af_feet_honeywell_02jpg.jpeg | Replaced foot
Tek_wp1000af_honeywell_tag.jpeg|Tag added by Honeywell - indicates the later usage of this mainframe
Tek_wp1000af_honeywell_tag.jpeg | Tag added by Honeywell - indicates the later usage of this mainframe
Tek_WP1000AF_gooding.jpg | A picture (of a picture) containing a WP1000AF system in the 1970ies
</gallery>
</gallery>
===Links===
* [https://www.gooding.org/mike/sweatt-award.html Michael J. Gooding on the DPO/WP1000AF] ([[Media:Tek_WP1000AF_gooding_page.pdf | local backup]])




Latest revision as of 22:48, 4 July 2024

Tektronix WP1000AF
Signal processing system

Produced from (?) to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix WP1000AF Signal Processing System is a bundle of a DPO, two 7A16A vertical plugins and two 7B71 horizontal plugins. All components have additional modifications (Mod 515C or -D), which allow an external computer to control some of the front panel settings. The National Stock Number (NSN) for this bundle is 6625-01-034-4833.

Parts of the WP1000AF bundle

Count NSN Number Tek Name/Parts Description
1 7021-01-038-5028 P7001 + D7704 + A7704 Mod 515C
2 6625-01-037-0091 7A16A Mod 515D
2 7B71 Mod 515C
1 Documentation
5305-01-076-3151 213-0054-00 Screw, 6-32, 5/16, Pan-Head

Mainframe

The 7704A Mod 515C adds the ability to remotely operate the vertical, horizontal and triggering modes of the mainframe. Additional connectors on the rear are directly connected to the plugin-compartments to allow remote operations for the plugins.

Pinout of the remote connector for the Mainframe

Pin Function Data Type Range Description
Coax #1 n.C.
Coax #2 n.C.
Coax #3 n.C.
5 Single Pins Device Code See Table below
Coax #4 Remote Control 8-Bit serial TTL-Compatible Bit 8+7+6: Vert mode
Bit 6+5: B Trigger
Bit 4+3: A trigger
Bit 2+1: Horz mode
Info: Bit 6 is shared
  • Front view of the system. The Mainframe and the plugins have remote/local switches

    Front view of the system. The Mainframe and the plugins have remote/local switches

  • Tag indicating the modification

    Tag indicating the modification

  • Remote/local switch on the lower section of the DPO

    Remote/local switch on the lower section of the DPO

  • Rear view of the system

    Rear view of the system

  • Tag added by Honeywell - indicates the later usage of this specific mainframe

    Tag added by Honeywell - indicates the later usage of this specific mainframe

  • The additional connectors for remote control

    The additional connectors for remote control

  • The additional connectors for remote control (rear view)

    The additional connectors for remote control (rear view)

  • Replacements for the remote control connectors are still available in 2024

    Replacements for the remote control connectors are still available in 2024

  • The switch to turn off the control illumination was removed.The Mod 515C needs a permanent 5V supply.

    The switch to turn off the control illumination was removed.The Mod 515C needs a permanent 5V supply.

  • Additional connector board on the power supply

    Additional connector board on the power supply

  • Most boards of the Mod 515C modification

    Most boards of the Mod 515C modification

  • Overview on the additional boards in the lower section of the mainframe

    Overview on the additional boards in the lower section of the mainframe

  • The modified mode switches.

    The modified mode switches.

  • Mod 515C horizontal mode switch assembly. The lights work independently from the switches.

    Mod 515C horizontal mode switch assembly. The lights work independently from the switches.

  • Mod 515C horizontal mode switch assembly. The lights work independently from the switches.

    Mod 515C horizontal mode switch assembly. The lights work independently from the switches.

  • Mod 515C vertical mode switch assembly. The lights work independently from the switches.

    Mod 515C vertical mode switch assembly. The lights work independently from the switches.

  • Mod 515C vertical mode switch assembly. The lights work independently from the switches.

    Mod 515C vertical mode switch assembly. The lights work independently from the switches.

  • The main logic board of the Mod 515C

    The main logic board of the Mod 515C

  • The main logic board of the Mod 515C

    The main logic board of the Mod 515C

  • The main logic board of the Mod 515C

    The main logic board of the Mod 515C

  • The serial receiver board

    The serial receiver board

  • The serial receiver board

    The serial receiver board

  • The serial receiver board

    The serial receiver board

  • The Mod 515C calibrator board

    The Mod 515C calibrator board

  • Additional coax connectors of the plugin interfaces

    Additional coax connectors of the plugin interfaces

  • Additional coax connectors of the plugin interfaces

    Additional coax connectors of the plugin interfaces

P7001

The only modification to the P7001 was done on the z-axis/front panel pcb. A switch allowed to change to a longer timeout period for the external computer.

  • Z-Axis/Frontpanel pcb with additional switch and timing resistor

    Z-Axis/Frontpanel pcb with additional switch and timing resistor

  • Z-Axis/Frontpanel pcb with additional switch and timing resistor

    Z-Axis/Frontpanel pcb with additional switch and timing resistor

7A16A Mod 515D Plugin

The 7A16A Mod 515D adds the ability to remotely operate the Bandwith, Polarity and Position functions of the plugin.

Pinout of the remote connectors for the vertical plugins

Pin Function Input Type Range Description
Coax #1 Polarity Digital 0 or 5V, TTL compatible +5V => +Up
0V => invert
open => +Up
Coax #2 Bandwith Digital 0 or 5V, TTL compatible +5V => Full
0V => 20MHz
open => Full
Coax #3 Position Analog 0...5V +5V => max upward
0V => max downward
open => center
5 Single Pins Device Code See Table below
Coax #4 n.C.
  • Front view of a 7A16A plugin with Mod 515D

    Front view of a 7A16A plugin with Mod 515D

  • Left side

    Left side

  • Right side

    Right side

  • Top side

    Top side

  • Closeup of serial number and Mod 515D sticker

    Closeup of serial number and Mod 515D sticker

7B71 Mod 515C Plugin

The 7B71 Mod 515C adds the ability to remotely operate the triggering level, the position & delay time, the magnifier setting and the trigger-modes. The modified 7B71 timebase can be configured as a delaying or as a delayed timebase.

Pinout of the remote connectors for the horizontal plugins

Pin Function Input Type Range Description
Coax #1 Trigger Level Analog 0...5V +5V => max
0V => min
open => center
Coax #2 Delay Time Mult. Analog 0...5V +5V => max
0V => min
open => center
Coax #3 Position Analog 0...5V +5V => max
0V => min
open => center
5 Single Pins Device Code See Table below
Coax #4 Trigger & Mag. 8-Bit serial TTL-Compatible Bit 8: Mag
Bit 7: Trig Slope
Bit 6+5: Trig Coupl.
Bit 4+3: Trig Mode
Bit 2+1: Trig Source
  • Front view of a 7B71 plugin with Mod 515C

    Front view of a 7B71 plugin with Mod 515C

  • Left side

    Left side

  • Right side

    Right side

  • Top side

    Top side

  • Closeup of serial number and Mod 515C sticker

    Closeup of serial number and Mod 515C sticker

Device Code Matrix on the 5 rear Remote Connectors

The single contacts of each connector are grounded in different patterns to provide electrical identification to the computer.

Connector Single Pin #1 Single Pin #2 Single Pin #3 Single Pin #4 Single Pin #5
Left vertical plugin Open (n.C.) GND GND GND GND
Right vertical plugin GND Open (n.C.) GND GND GND
A horizontal plugin GND GND Open (n.C.) GND GND
B horizontal plugin GND GND GND Open (n.C.) GND
Mainframe GND GND GND GND Open (n.C.)


Field of Application

Some details of the modification indicate that the WP1000AF system was developed either specifically for or in close consultation with Honeywell. Honeywell did some additional, but minor modifications to the system. The feet were modified so that the device could be fixed in place. They also added a cable tie holder and a tag to the back of the unit. The result got the Honeywell part-number 10066273-101 and the NSN number 6625-01-060-4390. The pictures on this page show such a device. Honeywell most likely used one of their own type of computer systems to control the DPO.

The contractors name and the contract number (see picture below) indicate that this specific instrument was involved in the development of the F15 aircraft project. And this external page: Michael J. Gooding, H. W. Sweatt Award reveals that a WP1000AF system was used in the Test Environment (TITE) for the F15 Tactical Electronic Warfare System (TEWS).

Parts of the Honeywell 10066273-101 bundle

NSN Number Component part number Description Manufacturer
5365-01-053-8742 10057922-101 Spacer, plate Honeywell
5365-01-052-9612 10057922-102 Spacer, plate Honeywell
6625-01-034-4833 WP1000AF Oscilloscope Tektronix
TY24M Cable tie Thomas & Betts
TC5342A Cable tie holder Thomas & Betts
MS24693C50 Screw Military Standards
33A1-13-484-1 Documentation Ordnance Corps
10063681-222 Honeywell
5310-01-082-3879 10057921-102 Nut Honeywell


  • Replaced foot

    Replaced foot

  • Replaced foot

    Replaced foot

  • Replaced foot

    Replaced foot

  • Tag added by Honeywell - indicates the later usage of this mainframe

    Tag added by Honeywell - indicates the later usage of this mainframe

  • A picture (of a picture) containing a WP1000AF system in the 1970ies

    A picture (of a picture) containing a WP1000AF system in the 1970ies


Links

Retrieved from "https://w140.com/tekwiki/index.php?title=WP1000AF&oldid=95189"