Pacific Measurements 1038: Difference between revisions

Pacific Measurements 1038 (view source)

Revision as of 22:18, 21 April 2019

2,052 bytes added , 21 April 2019

no edit summary

Jafinch78

93

edits

@@ Line 16: / Line 16: @@
 <!-- [[File:Pacific Measurements 1038.jpg | thumb | 300px | right | Pacific Measurements 1038 with Tek D11 display]] -->
-The '''Pacific Measurements 1038''' was a scalar network analyzer incorporating a Tektronix [[5110 | D10]], [[5111 | D11 storage]] or [[http://w140.com/tekwiki/wiki/Introduction_to_the_5000-Series_Oscilloscopes D14]] [[5000-series scopes]] display unit.  Pacific Measurements later became part of [[Wavetek]].
+The '''Pacific Measurements 1038''' was a 1 or 2 channel scalar network analyzer incorporating a Tektronix [[5110 | D10]] (P-7 long persistance phosphor), [[5111 | D11 storage]] (Split Screen Storage) or [[http://w140.com/tekwiki/wiki/Introduction_to_the_5000-Series_Oscilloscopes D14]] [[5000-series scopes]] display unit mainframe with optional rack mount and IEEE bus. <br>
+Options were available for:<br>
+• Horizontal Plug-Ins H10 (Sweep drive), H11 (Sweep Drive and memory address circuits), H12 (Sweep drive and ratio channel), H13 (Sweep drive, memory address circuits and ratio channel) and K11 (Replaces H11 and provides amplitude sweep). <br>
+• Vertical Plug-Ins V10 (Log amp and signal conditioning), V11 (Log amp, signal conditioning and 256 point memory), V12 (Log amp, signal conditioning and 1024 point memory) and V20 (Linear amp, 1024 point memory and for use in conjunction with Model 1018B power meter). <br>
+• N10 Plug-In (2 Channel Network Analyzer). <br>
+• NS20 Plug-In (2 Channel Network Analyzer) with optional NS201 (2 to 18.5 GHz RF Source Module). <br>
+• C10 Plug-In Calibration Fixture and Extender Kit for direct calibration and check out of the D14/D14A Mainframe. It has extension cables to permit calibration and maintenance of the H/V system plug-ins. <br>
+• Power Input Calibrator Unit (Detector Simulator - P/N 15484) will act as a "Standard" detector to furnish accurate voltages to the H/V system when it is desired to calibrate the amplitde correction circuitry. <br>
+Pacific Measurements later became part of [[Wavetek]].
 {{BeginSpecs}}
 {{Spec | H/V System | }}
 {{Spec | -------------------- | }}
+{{Spec | Offset Control Resolution | 3 Digits }}
+{{Spec | Offset Control Range | ±99.9dB }}
+{{Spec | Offset Control Accuracy | ±0.02dB/10dB ±0.05dB }}
+{{Spec | Drift @ 0dBm | <0.01dB/°C (+15° to +45°C ) }}
+{{Spec | Drift @ -40dBm | <0.5dB/24 Hrs at constant temperature ) }}
 {{Spec | Frequency Range | 100kHz to 18.5GHz }}
 {{Spec | Frequency Range with Single Diode (P/N:15272)| }}
@@ Line 36: / Line 51: @@
 {{Spec | Dimensions - Bench Mount (H x W x D) | 381 x 216 x 483 mm ( 15 x 8.5 x 19 in.) }}
 {{Spec | Dimensions - Rack Mount (H x W x D) | 178 x 483 x 483 mm ( 7 x 19 x 19 in.) }}
+{{Spec | Dimensions - H/V Plug-Ins (H x W x D) | 16.8 x 6.60 x 29.7 cm ( 6.6 x 2.6 x 11.7 in.) }}
 {{Spec | Weight | 18.2kg (40lbs) }}
+{{Spec | Weight Vertical Plug-In | 2.32kg (5lbs) }}
+{{Spec | Weight Horizontal Plug-In | 2.0kg (4.4lbs) }}
 {{Spec | -------- | }}
 {{Spec | Power Detectors | P/N's 15272, 13782 and 13783 unless noted}}
@@ Line 57: / Line 75: @@
 {{Spec | Flatness P/N:15882 | ±2.0dB from 26.5 to 40.0GHz}}
 {{Spec | Operating Temperature | 0° to 50°C }}
+{{Spec | Non-operating Temperature | -50° to +65°C }}
 {{Spec | Measurement Accuracy | 0.2dB to 2dB from 30MHz to 26.5GHz }}
 {{Spec | Measurement Accuracy | 0.5dB to 2dB from 26.5GHz to 40.0GHz }}
@@ Line 65: / Line 84: @@
 ==Manuals ==
 ''Please add''
+==Prices==
+''Please add''
+==Links==
+* ''Sphere Research''[https://www.sphere.bc.ca/test/rf-analyzers.html]
+* ''"MAR104 - Mobile Amateur Rain Radar" Project with Return Loss Measurement Example''[http://members.inode.at/576265/rainradar.html]
 ==Pictures ==