067-0500-00: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The '''Tektronix 067-0500-00''' (also known as [[3M1]]) is a calibration fixture for adjusting the normalizing capacitor | The '''Tektronix 067-0500-00''' (also known as [[3M1]]) is a calibration fixture for adjusting | ||
behind the plug-in connector in [[560-series scopes]]. | the normalizing capacitor behind the plug-in connector in [[560-series scopes]]. | ||
It consists of a Schmitt trigger that is driven from | It consists of a Schmitt trigger that is driven from | ||
Revision as of 17:40, 3 February 2018
The Tektronix 067-0500-00 (also known as 3M1) is a calibration fixture for adjusting the normalizing capacitor behind the plug-in connector in 560-series scopes.
It consists of a Schmitt trigger that is driven from a single-ended input coming from a BNC connector on the front panel. The Schmitt trigger produces balanced output signals with controlled source impedance. The normalizing capacitor is adjusted using a procedure similar to adjusting probe compensation. When adjusted correctly, the voltage division ratio formed by the plug-in's output impedance and the mainframe's input impedance should be a real value which does not change across the specified frequency range of the scope. After the scope is normalized using the 067-0500-00, other plug-ins can be adjusted to produce clean transient response in the normalized scope.
