7L18: Difference between revisions

Revision as of 04:16, 2 July 2019

Template:Plugin Sidebar 2 The Tektronix 7L18 is a spectrum analyzer plug-in introduced in 1978 for 7000-series scopes. It occupies three plug-in bays in the oscilloscope.

The 7L18 covers the range from 1.5 GHz to 18 GHz with the internal mixer and 12.5 GHz to 60 GHz using external mixers. Note that it will NOT do 1.5 GHz to 18 GHz in one span, it will only max span the range selected by the BAND/HARMONIC control. This range is determined by the heterodyne harmonic number and sign (sideband) and the range of the first LO, which is 2 GHz to 4 GHz.

The input attenuator range is 0 dB to 60 dB in 10 dB steps and is a standard Weinschel Engineering product driven by a belt. The range is encoded for the digital dBm reference level display. The signal then passes through a YIG preselector filter with a 50 MHz bandwidth. After the YIG filter, the signal enters the RF input of the mixer assembly.

The LO is a YIG tuned oscillator covering the 2 GHz to 4 GHz range. Its output passes through a sampler assembly used to PLL the YIG on small resolution bandwidths. The output of the sampler goes to the LO input on the mixer. The mixer IF output is 510 MHz.

Specifications

please add

Internals

The 7L18's components are controlled by an Intel 4004 4-bit microprocessor.

Links

Pictures

Service views:

Top view
Bottom view
Service setup for the right front panel

Boards within the digital card cage (from back to front):

CRT Readout board
Center Freq Readout board
Sweep Horiz board
Span Atten board
Phase Lock module, rear
Phase Lock module, front
Phase Lock Logic CTL
VR Noise Filter
Log & Video Amp
Center Freq DVM
Digital Storage, front
Digital Storage, back
Micro Computer

The microcomputer board is built using three very old Intel chips: an Intel 4004 processor, an Intel 4002 320-bit RAM and 4-bit output port, and an Intel D4289 standard memory interface. The D4289 connects the 4004 to the two 2K8 ROMs. Note that in an earlier version of the 7L18 there were 6 ROMs.

Internal views of the analog parts:

Internal of the LO sampler

@@ Line 40: / Line 40: @@
 * [[Media:Tekscope 1977 V9 N3.pdf   | TekScope Vol. 9 No. 3, 1977]]
 * [http://w140.com/tektronix_spectrum_analysis_using_waveguide_mixers.pdf Spectrum Analysis Using Waveguide Mixers (PDF)]
+* [[016-0631-01|Waveguide Mixers for 492 and 7L18]]
 ==Pictures==