1121: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 10: | Line 10: | ||
* [http://bama.edebris.com/download/tek/1121/Tek%201121.pdf Tektronix 1121 Manual (PDF)] | * [http://bama.edebris.com/download/tek/1121/Tek%201121.pdf Tektronix 1121 Manual (PDF)] | ||
<gallery> | |||
Image:Tek 1121 front.jpg | |||
Image:Tek 1121 left internal.jpg | |||
Image:Tek 1121 right.jpg | |||
Image:Tek 1121 top.jpg|Top view | |||
Image:Tek 1121 bottom.jpg|Bottom view | |||
Image:Tek 1121 turret attenuator.jpg|Turret attenuator | |||
Image:Tek 1121 right external.jpg | |||
Image:Tek 1121 rear.jpg | |||
</gallery> |
Revision as of 14:49, 2 July 2011
The Tektronix 1121 is a 5Hz to 17MHz amplifier with gain of 100 introduced in 1960. The maximum output is 2Vpp into a 93-ohm load. The 1121 is AC coupled at the input, but DC coupled at the output. The output stage is a 12BY7A pentode, V483, biased with 33mA plate current, which gives a transconductance of about 13mS. Assuming the tube operates unilaterally, this gives an impedance of about 77 ohms at the cathode of V483. Series output resistor R486, 30 ohms, makes the output resistance of the 1121 about 107 ohms. (Why is this not 93 ohms?)
The 1121 uses a turret attenuator at the input.
-
-
-
-
Top view
-
Bottom view
-
Turret attenuator
-
-