TDS2002: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
* [ | {{Oscilloscope Sidebar | | ||
title=Tektronix TDS2002 | | |||
summary=Digital Storage 60 MHz 2-channel scope | | |||
image=TDS2002_Waveform_image.jpg | | |||
caption=Tektronix TDS2002 | | |||
introduced=2005 | | |||
discontinued=? | | |||
manuals= | |||
* [[Media:071-1064-00.pdf|TDS1000 and TDS2000 Series user manual]] (1.2 MB, PDF, OCR) | |||
* [[Media:071-1064-00_TDS1000_and_TDS2000-Series_User_Manual_Revision_A.pdf| 071-1064-00 TDS1000 and TDS2000-Series User Manual Revision A]] (10.32 MB PDF) | |||
* [[Media:071-1076-02_TDS1000_and_TDS2000-Series_Service_Manual.pdf| 071-1076-02 TDS1000 and TDS2000-Series Service Manual]] (8.032 MB PDF) | |||
* [[Media:077-0444-01_TDS1000, & TDS2000-Series_Programmer_Manual.pdf| 077-0444-01 TDS1000, & TDS2000-Series Programmer Manual]] (15.25 MB PDF) | |||
* [[Media:3GW_15314_6_TDS1000 and TDS2000 Series Oscilloscopes_Datasheet.pdf| TDS1000 and TDS2000 Series Oscilloscopes Datasheet]] (666 KB PDF) | |||
* [[Media:TDS1000 AND TDS2000 SERIES FIRMWARE UPDATE.txt| TDS1000 AND TDS2000 Series Firmware Update Notice]] (786 B TXT) | |||
}} | |||
The '''Tektronix TDS2002''' is a dual-channel, 60 MHz, 1 GS/s digital scope with a color LCD screen. An External trigger input on front, and the rear mounted optional TDS2MEM Communication Module provides a CompactFlash card slot, Centronics-type printer port, RS-232, and GPIB rear ports for convenient inter-connectivity. | |||
Easy access to the MATH MENU button provides waveform adjustments (CH1-CH2, CH2-CH1, CH1+CH2) along with FFT (spectrum, harmonics, distortion, noise, impulse, vibration) measurements. Measurements can also be performed for time (frequency) and voltage (amplitude). Repetitive signals can be captured and averaged to remove noise, or captured as a single-shot signal. | |||
Triggering of signal capturing is available through a comprehensive TRIG MENU providing Edge (rising or falling), Video (NTSC, PAL, SECAM), and Pulse Width (or Glitch) triggering on CH1, CH2, Ext and AC Line sources. | |||
{{BeginSpecs}} | |||
{{Spec | Bandwidth and Channels| 60 MHz; Bandwidth is 20 MHz at 2 mV/div; 2 Channels }} | |||
{{Spec | Vertical Sensitivity| 2 mV to 5 V/div with calibrated fine adjustment }} | |||
{{Spec | Time Base Range| 5 ns to 50 s/div }} | |||
{{Spec | Sample Rate| 1.0 GS/s on each channel }} | |||
{{Spec | Record Length| 2.5 K points }} | |||
{{Spec | Automatic Waveform Measurements| Period, Frequency, +Width, -Width, Rise Time, Fall Time, Max, Min, Peak-to-Peak, Mean, Cycle RMS }} | |||
{{Spec | Waveform Processing| Operators (Add, Subtract, FFT); FFT (Windows: Hanning, Flat Top, Rectangular; 2048 sample points; Autoset Menu (Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems with undo autoset) }} | |||
{{Spec | Autoset Menu| Square Wave (Single-cycle, Multi-cycle, Rising or Falling Edge); Sine Wave (Single-cycle, Multi-cycle, FFT Spectrum); Video (NTSC, PAL, SECAM) Field: All, Odd or Even Line:All or Selective Line Number }} | |||
{{EndSpecs}} | |||
==Pictures== | |||
<gallery> | <gallery> | ||
Tek tds 2002 1.jpg | Tek tds 2002 1.jpg | ||
| Line 9: | Line 42: | ||
</gallery> | </gallery> | ||
[[Category: | |||
[[Category:TDS1000 series scopes]] | |||
Revision as of 14:17, 25 May 2019
The Tektronix TDS2002 is a dual-channel, 60 MHz, 1 GS/s digital scope with a color LCD screen. An External trigger input on front, and the rear mounted optional TDS2MEM Communication Module provides a CompactFlash card slot, Centronics-type printer port, RS-232, and GPIB rear ports for convenient inter-connectivity.
Easy access to the MATH MENU button provides waveform adjustments (CH1-CH2, CH2-CH1, CH1+CH2) along with FFT (spectrum, harmonics, distortion, noise, impulse, vibration) measurements. Measurements can also be performed for time (frequency) and voltage (amplitude). Repetitive signals can be captured and averaged to remove noise, or captured as a single-shot signal.
Triggering of signal capturing is available through a comprehensive TRIG MENU providing Edge (rising or falling), Video (NTSC, PAL, SECAM), and Pulse Width (or Glitch) triggering on CH1, CH2, Ext and AC Line sources.
Key Specifications
| Bandwidth and Channels | 60 MHz; Bandwidth is 20 MHz at 2 mV/div; 2 Channels |
|---|---|
| Vertical Sensitivity | 2 mV to 5 V/div with calibrated fine adjustment |
| Time Base Range | 5 ns to 50 s/div |
| Sample Rate | 1.0 GS/s on each channel |
| Record Length | 2.5 K points |
| Automatic Waveform Measurements | Period, Frequency, +Width, -Width, Rise Time, Fall Time, Max, Min, Peak-to-Peak, Mean, Cycle RMS |
| Waveform Processing | Operators (Add, Subtract, FFT); FFT (Windows: Hanning, Flat Top, Rectangular; 2048 sample points; Autoset Menu (Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems with undo autoset) |
| Autoset Menu | Square Wave (Single-cycle, Multi-cycle, Rising or Falling Edge); Sine Wave (Single-cycle, Multi-cycle, FFT Spectrum); Video (NTSC, PAL, SECAM) Field: All, Odd or Even Line:All or Selective Line Number |
