TM500 Series plug-in interface: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 36: | Line 36: | ||
|- | |- | ||
|} | |} | ||
Interface connections viewed from rear of power module. Pins 14 through 28 are used for signal connections. | |||
==Used in== | ==Used in== |
Revision as of 17:29, 5 May 2019
B side | A side | |
---|---|---|
Pin | Function | Function |
13 | 25 VAC winding | 25 VAC winding |
12 | +33.5 V filtered DC | +33.5 V filtered DC |
11 | Collector lead of PNP series pass | Base lead of PNP series pass |
10 | Transformer shield lead | Emitter lead of PNP series pass |
9 | ±33.5 V common return | ±33.5 V common return |
8 | −33.5 V filtered DC | −33.5 V filtered DC |
7 | Collector lead of NPN series pass | Emitter lead of NPN series pass |
6 | No connection | Base lead of NPN series pass |
5 | 17.5 VAC winding | 17.5 VAC winding |
4 | +11.5 V common return | +11.5 V common return |
3 | +11.5 V common return | +11.5 V common return |
2 | +11.5 V filtered DC | +11.5 V filtered DC |
1 | 25 VAC winding | 25 VAC winding |
Interface connections viewed from rear of power module. Pins 14 through 28 are used for signal connections.
Used in
Pictures
Connector keys
- between pins 6 and 7 - TM500 standard
- between pins 23 and 24 - signal source family modules
- between pins 21 and 22 - measurement family modules
- between pins 19 and 20 - power supply family modules
- between pins 25 and 26 - SC502 family
- ...