P6444

The Tektronix P6444 programmable-threshold probe can be used with the 1230, 1225 and 1220 logic analyzers.

It is a 16-channel data acquisition probe with 2 clocks, 1 qualifier and 1 external trigger input.

Note from operators manual:

You cannot mix P6442 probes with P6443 or P6444 probes to take an acquisition.
If you acquire data on P6442 probes at the same time you try to sample data on P6443/P6444 probes, the acquired data from the P6443/P6444 probes will be invalid.

Specifications

The P6444 is significantly larger then the P6442 and P6443. It uses the 174-0752-00, 174-0763-00, and 174-0764-00 lead set.

Two versions exist, one has a removable cable and a different probe socket. The internals are exactly the same for both version though. The removable cable version was made before 1991 and the fixed cable after 1991.

The probe connectors have a 430 Ω resistor inline with the connector.

The pin-out of the probe is given. (looking from the front)

Notch						Notch						Notch
NC	EXT	CLK2	QUAL	CLK1		NC	D14	D12	D10	D8		NC	D6	D4	D2	D0
GND	GND	GND	GND	GND		GND	D15	D13	D11	D9		GND	D7	D5	D3	D1

Links

• P6444 @ barrytech.com

Pictures

• 
• 
• 
• 

Thanks to Keith Neufeld for the pictures!