502: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 15: | Line 15: | ||
<gallery> | <gallery> | ||
Image:Tek_502_front.jpg|502 front view | Image:Tek_502_front.jpg|502 front view | ||
Image:Tek 502a block.png|502A block diagram | |||
Image:Tek rm 502a front.jpg|RM 502A | Image:Tek rm 502a front.jpg|RM 502A | ||
Image:Rm 502a display.jpg|RM 502A display | Image:Rm 502a display.jpg|RM 502A display | ||
Image:Rm502a bottom2.jpg|RM 502A bottom | |||
Image:Rm502a transformer wiring.jpg|RM 502A transformer wiring | |||
Image:Rm502a top.jpg|RM 502A top | |||
Image:Rm502a floating pre.jpg|RM 502A vibration-isolated vertical amp | |||
</gallery> | </gallery> | ||
Revision as of 10:59, 17 November 2011
The 502 is a dual-beam oscilloscope with a high sensitivity of 100 or 200 microvolts/cm, depending on the mode whether differential inputs are used. At 200uV/cm the bandwidth is only 100kHz but at 200mV/cm it rises to 1MHz. There is a 502, a 502A, and an RM502A. There is a transistor-regulated heater supply build in.
Price at July 1959 was $825.
Mod 104 on a 502 provides single sweep lockout.
-
502 front view
-
502A block diagram
-
RM 502A
-
RM 502A display
-
RM 502A bottom
-
RM 502A transformer wiring
-
RM 502A top
-
RM 502A vibration-isolated vertical amp
