2247A

Manuals – Specifications – Links – Pictures

The Tektronix 2247A is a 100 MHz four-channel analog oscilloscope with a built-in 200 MHz counter/timer. (It is unknown if a 2247 non-A model was ever built.)

The 2247A is identical to the 2246 but with a counter/timer (C/T) integrated into the trigger system to provide many automated counting and timing measurements with high accuracy.

Channels 1-2 are fully-functional, whereas 3-4 are limited in both deflection factor and coupling, as they are intended mainly for digital and trigger signals.

The 2247A also has advanced features like automatic setup, tracking cursors, integrated voltmeter, and can store/recall of 20 front panel setups.

Key Specifications

Bandwidth	100 MHz
Deflection	CH 1, CH 2: 2 mV/div to 5 V/div in 1-2-5 seq; CH 3, CH 4: 0.1 V/div and 0.5 V/div, all ±2%; BW Limit: 20 MHz ±15%
Vertical Operating Modes	CH1,2,3,4, CH2 Invert, Add, Alt, Chop (625 kHz)
Input Impedance	1 MΩ ±1.0% // 20 pF ±1 pF
Maximum Input Voltage	400 V (DC + peak AC) or 800 V (p-p ac at ≤ 10 kHz)
Sweep Speeds	A Time Base: 0.5 s/div to 20 ns/div in 1-2-5 seq; B Time Base: 5 ms/div to 20 ns/div in 1-2-5 seq (×10 magnifier to 2 ns/div)
Trigger	DC, Noise Reject, HF Reject, LF Reject, AC, TV Line, TV Field
Trigger Modes	A Mode: Auto Level, Auto, Norm, TV Line, TV Field, Single Seq. B Mode: Runs After Delay, Auto Level, Norm, TV Line (From A Source)
Trigger Source A & B	Vert, CH1, 2, 3, 4, Line
Voltmeter	DC, +Peak, −Peak, PK-PK, Gated Volts, Smart Tracking Cursors: Volts, Gnd, Trigger Lvl
Counter/Timer	Freq, Period, Width, Totalize, Freq Ratio, Sec, 1/Sec, Phase, Rise/Fall Time, Prop Delay Time
Cursors	Time, 1/Time, Delta Time, 1/Delta Time, Delta Phase, Volts
Interface	Ext Counter/Timer Base Input connector; Ext Z-Axis Input connector
Probes	Two P6109 100 MHz ×10 probes, BNC connector with a readout pin
Power	100 W max, 90 − 250 VAC, 48 − 445 Hz

Pictures

• 

  Front

• 
• 
•