7T11: Difference between revisions
(New page: 7T11 is a time base plugin for the 7000 mainframe family. It was secialy designed to build a sampling scope configuration together with the S711 including one of the samplingheads. Fastest...) |
No edit summary |
||
| Line 1: | Line 1: | ||
7T11 is a time base plugin for the 7000 mainframe family. It was | 7T11 is a time base plugin for the 7000 mainframe family. It was specialy designed to build a sampling scope configuration together with the S711 including one of the samplingheads. Fastest sweep is 10pS/div and lowest jitter is 10pS, depending on actual settings. | ||
Trigger bandwith is 500MHz at internal and 1 GHz at external trigger source. Additional there is an internal 200MHz oscillator with analog trigger count down, which can be synchronized from external signals up to 14GHz. | Trigger bandwith is 500MHz at internal and 1 GHz at external trigger source. Additional there is an internal 200MHz oscillator with analog trigger count down, which can be synchronized from external signals up to 14GHz. | ||
Revision as of 01:47, 31 March 2010
7T11 is a time base plugin for the 7000 mainframe family. It was specialy designed to build a sampling scope configuration together with the S711 including one of the samplingheads. Fastest sweep is 10pS/div and lowest jitter is 10pS, depending on actual settings.
Trigger bandwith is 500MHz at internal and 1 GHz at external trigger source. Additional there is an internal 200MHz oscillator with analog trigger count down, which can be synchronized from external signals up to 14GHz.
Due its sampling principle it can only be used on periodic signals and samples are allways taken from signals portion delayed from the trigger event. This delay is adjustable on the frontpanel to select the portion of interest.
Due the high bandwith of the sampling heads, there is no Y-delay-line in the heads, so the T711 needs an external pretrigger, if there are random, high jitter signals or if the original signal triggered onto shall be observed.
Manual or external sweep is possible to connect a plotter.
Because the 7T11 and 7S11 have direct interconnections side by side, they work als in slow mainframes. The 7T11 supports up to two 7S11 and allows also xy-operation.