524: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 9: | Line 9: | ||
but P7 and P11 phosphors were also available. | but P7 and P11 phosphors were also available. | ||
The | The vertical signal path of the 524 is similar to that of the [[514]]. | ||
of the 524 is similar | They have similar front-ends and [[distributed amplifier|distributed vertical output amplifiers]]. | ||
* [http://bama.edebris.com/download/tek/524ad/Tek%20524AD.pdf Tektronix 524AD Manual (PDF)] | * [http://bama.edebris.com/download/tek/524ad/Tek%20524AD.pdf Tektronix 524AD Manual (PDF)] | ||
Revision as of 11:16, 22 July 2012
The Tektronix 524 is an oscilloscope that is designed for monitoring television waveforms. It is a monolithic oscilloscope. It has a thermal cutoff.
Interestingly, the 524 appears on page 33 of the 1966 RCA Test Equipment Catalog.
The 524 weighs 61 pounds and uses 500 watts. It uses selenium rectifiers in the low-voltage power supply. It has a total of 4kV CRT beam acceleration, -1.5kV on the cathode and +2.5kV on the anode. It normally came with a 5ABP1 CRT which has P1 phosphor, but P7 and P11 phosphors were also available.
The vertical signal path of the 524 is similar to that of the 514. They have similar front-ends and distributed vertical output amplifiers.
-
-
-
Time Mark Gen for 524
